M30 so close to starting but won't

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rs4pro3
    R3V Elite
    • Oct 2003
    • 5808

    #1

    M30 so close to starting but won't

    Just tried cranking the m30 after fixing some few small problems(bad main relay and reference sensor).
    It cranks and you can hear the engine struggling to try to run, but it won't if you pump the gas it fires a little easier but won't catch.
    Any ideas? I'm thinking maybe fuel pressure or the ICV. I ran a resistance test on the icv and it work but I haven't tried suppling power to it to see if it closes or not.
    85 325e 2.7 ITB'd stroker
  • Jon325i
    R3V OG
    • Oct 2003
    • 6934

    #2
    I would look into the fuel pressure.....sounds like its not getting enough/any. Have you tried prying open the intake boot at the throttle body and give it a shot of gas just to see if it will run? I tried this techique once years ago when my Porsche 924 wasn't turning over. The shot of gas worked.....turned out to be the mechanical fuel distributor stopped working.

    Jon
    Rides...
    1991 325i - sold :(
    2004 2WD Frontier King Cab

    RIP #17 Jules Bianchi

    Comment

    • rs4pro3
      R3V Elite
      • Oct 2003
      • 5808

      #3
      It's getting fuel, as I pulled the return line to make sure I had them hooked up correct. I'll test the pressure tommorow.
      85 325e 2.7 ITB'd stroker

      Comment

      • Madhatter
        E30 Modder
        • Oct 2004
        • 966

        #4
        Do you guys have this stuff called aero-start in a spray can. Basically you can spray it into an intake to get an engine to start. It is basically just a pressurised alcohol spray in a can, good for little things like this.
        Just a little project im working on
        - http://www.lse30.com -

        Comment

        • rs4pro3
          R3V Elite
          • Oct 2003
          • 5808

          #5
          I don't know, I made a fuel pressure guage, and will test the pressure tommorow.
          85 325e 2.7 ITB'd stroker

          Comment

          • E30/M30
            Wrencher
            • Feb 2004
            • 224

            #6
            Is it sparking ok ?

            Any sign's of fuel on the spark plug's ?

            Hope you get it sorted soon mate.

            Andy

            Comment

            • rs4pro3
              R3V Elite
              • Oct 2003
              • 5808

              #7
              It's got spark, I tested the fuel pressure today and it has 38psi but there is a leak by the #2 injector.
              85 325e 2.7 ITB'd stroker

              Comment

              • george graves
                I waste 90% of my day here and all I got was this stupid title
                • Oct 2003
                • 19992

                #8
                Sounds like a reference sensor is still tripping you up.
                Originally posted by Matt-B
                hey does anyone know anyone who gets upset and makes electronics?

                Comment

                • rs4pro3
                  R3V Elite
                  • Oct 2003
                  • 5808

                  #9
                  Ya It may be the Speed sensor, I'll steal that one from our 528e maybe, but first I have to fix this fuel leak as it may be the cuase.
                  85 325e 2.7 ITB'd stroker

                  Comment

                  Working...