If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Now there is a wide range of things to test and check. Make sure your fuses are all good and plugged in (this is a given). Then using a fused jumper wire test the fuel pump at the relay to make sure the pump works. If it runs, then you move on to testing the crank positioning sensor with a multi-meter. If that is also good, then there are 2 possibilities: DME or a bad relay. Both of these problems are diagnosed by switching each item out, one at a time, with a known good part.
This is via my statement earlier. If you don't have a bentley repair manual you need one.
Comment