Announcement

Collapse
No announcement yet.

Steering Wheel shaking

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    I have heard that ATE solid rotors can come warped new (needs to be turned before use). I have heard good things about Balo and Brembo solid rotors.

    Aaron

    Comment


      #17
      Its my car. Will im pretty positive that it is warped rotors...

      They are brembos, and i toasted them in litterally 2 weeks, reason being that one of the brake ducts is missing, thus no airflow to cool the rotors. Adding to that, when i went to Virginia Beach, I took the most off the wall route i could find down there. I went route 33 all the way through west virginia, which litterally had 90 degree turns every quarter mile or less. Needless to say, i was on the brakes constantly. It was very hilly, and it took 6 hours to get across West Virginia alone. Im pretty confident thats the problem...

      Comment


        #18
        I am too Gabe. I just wanted to see what all the possibilities it could be just to make sure. I will probably just get Balo rotors cus I can get them cheap and swap those out almost first thing.

        Will
        RIP e30 (brilliantrot '91 325i) 11/17/06 Byebye: 8/21/07
        Welcome e30 (brilliantrot '90 325is) 12/23/06
        DaveCN = Old Man
        My signature picture was taken by ME! Not by anyone else!



        Originally posted by george graves
        If people keep quoting me in their sig, I'm going to burn this motherfucker down.

        Comment


          #19
          Originally posted by bmwannabe
          Its my car. Will im pretty positive that it is warped rotors...

          They are brembos, and i toasted them in litterally 2 weeks, reason being that one of the brake ducts is missing, thus no airflow to cool the rotors. Adding to that, when i went to Virginia Beach, I took the most off the wall route i could find down there. I went route 33 all the way through west virginia, which litterally had 90 degree turns every quarter mile or less. Needless to say, i was on the brakes constantly. It was very hilly, and it took 6 hours to get across West Virginia alone. Im pretty confident thats the problem...
          I am running without brake ducts right now and I seriously doubt they make any difference in braking. At least not on the street, and not enough to warp rotors in 2 weeks.

          RISING EDGE

          Let's drive fast and have fun.

          Comment


            #20
            I didnt know if that could have been a cause for the warping or not, just stating a fact.

            But I am almost positive that being on the brakes for 6 hours straight doesnt help. Continuous heat for 6 hrs + metal = warpage.

            Comment


              #21
              I'm gonna get new rotors from BMA for $30/each. I'll let ya know how that works out. Gabe, the steering wheel doesnt shake at highway speeds right? It's just when you're braking correct? I dont remember it shaking at like...45 or however fast we were going.

              Will
              RIP e30 (brilliantrot '91 325i) 11/17/06 Byebye: 8/21/07
              Welcome e30 (brilliantrot '90 325is) 12/23/06
              DaveCN = Old Man
              My signature picture was taken by ME! Not by anyone else!



              Originally posted by george graves
              If people keep quoting me in their sig, I'm going to burn this motherfucker down.

              Comment


                #22
                nope, doesnt shake on the highway. I had it pegged at 75 on the way home from cincy, didnt skip a beat.

                Comment


                  #23
                  Then everyone is purdy damn sure its rotors :) If it was CAB's it would shake at high speeds as well if I recall correctly.

                  Will
                  RIP e30 (brilliantrot '91 325i) 11/17/06 Byebye: 8/21/07
                  Welcome e30 (brilliantrot '90 325is) 12/23/06
                  DaveCN = Old Man
                  My signature picture was taken by ME! Not by anyone else!



                  Originally posted by george graves
                  If people keep quoting me in their sig, I'm going to burn this motherfucker down.

                  Comment


                    #24
                    Originally posted by PeaveyBassist
                    Then everyone is purdy damn sure its rotors :) If it was CAB's it would shake at high speeds as well if I recall correctly.

                    Will
                    No, it's probably both actually. Warped rotors will make your CABs wear fast.

                    RISING EDGE

                    Let's drive fast and have fun.

                    Comment

                    Working...
                    X