Which way does the chip go

[MR 325]

Putting the stock chip back in my ECU and I already took the JC out

Which way does the chip go?

Should I be able to read the sticker on the chip if the plug for the wiring harness is towards me or away from me?

[rwh11385]

ahahhaahhahahahhaahahahhahahahhaa.


hahahaahahhaahaahhahaha.


bitch.

there's a notch that lines up. only a moron couldn't figure it out.

[bmwm3n528]

there's a notch that lines up.

[MR 325]

Well, didnt actually look yet, thats why I posted it

Thanks

[DanGillan]

actually my chip/ecu doesnt have a notch. stock or the other one. neither. kinda annoying.

[EverWiser]

There should be a "notch" in one end of the chip and a corresponding symbol on the ECU's board where the chip plugs in...

|''''''''''''''''''''''''''''|
| Stock Chip ..C <---- "notch"
|.....................|

The screen print on the ECU board should have a corresponding "picture" of the notch.

[nando]

actually my chip/ecu doesnt have a notch. stock or the other one. neither. kinda annoying.

there is a marking somewhere, it marks where pin 1 on the chip is. just find pin 1 on the chip and match it with the socket. they're just standard flash chips, nothing special..

[EverWiser]

There should be a "notch" in one end of the chip and a corresponding symbol on the ECU's board where the chip plugs in...

|''''''''''''''''''''''''''''|
| Stock Chip ..C <---- "notch"
|.....................|

The screen print on the ECU board should have a corresponding "picture" of the notch.

In my picture above, pin 1 would be the upper right hand corner on the same end as the notch (in this case above the notch, same end)...