Auto shifter removal?

[GunMetalGrey]

How do I get the automatic tranny's shift "knob" off? Tranny needs to come out, any other info would be lovely.

[LJ851]

It has a set screw near the bottom of the handle iirc.

[scottinAZ]

+1 front side of the handle there is a setscrew that you need to remove. easy peasy

[bloodshot-e30]

saw zaw, torches, and a big hammer

[scottinAZ]

saw zaw, torches, and a big hammer

fuck that, too much work, coupla hundred feet of detcord should do the trick though.....

[bloodshot-e30]

fuck that, too much work, coupla hundred feet of detcord should do the trick though.....

lmfao yea that should work too... hahahahahah

i really did use the saw zaw getting mine out tho

[austin01]

Check this website: Check this website: http://www.formymercedes.com/Shift_K...ather_Boot.asp

[Holland]

Power shift from first to second pulling really hard... wait what?

[MR 325]

You shouldn't have to remove the shift "knob" to do the tranny.

If you're swapping an auto for an auto, you can leave the whole shifter assembly in place. Unclip the single selector rod from underneath. If you're doing a 5 seed swap, you can remove the whole shifter assembly in one piece minus the decrotive cover that goes over the console.

[GunMetalGrey]

^this, found out that you can just unclip the little rod going down. Thanks though!