Announcement

Collapse
No announcement yet.

HELP! M30 AFM PROBLEM!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    HELP! M30 AFM PROBLEM!!!

    So i bought a m30 afm a 027. And i install it and everyting goes ok. Except that it wont rev past 5k without hitting a limiter. What should i do? Swap out the boards? Also when you swap out the boards do you swap out the connector also?

    #2
    It's probably horribly out of adjustment, as it always is when people throw them in without a wideband.

    Do the R3V thing, and play with the wheel until you think the A/F is correct.

    Or, do it properly, and get on a dyno with a wideband and tune it right.

    Comment


      #3
      messed around with it for a bit. And then i noticed a rock stuck in it. So it didnt let the little thing slide all the way across. Now it works perfect no elctronics swap or anything. IM such a noob.

      Comment


        #4
        Originally posted by Mystikal
        It's probably horribly out of adjustment, as it always is when people throw them in without a wideband.

        Do the R3V thing, and play with the wheel until you think the A/F is correct.
        don't do this. afms are lazer toleranced and you'll likely fuck it up if you do.
        Build thread

        Bimmerlabs

        Comment

        Working...
        X