HELP! M30 AFM PROBLEM!!!

[e30 gangsta]

So i bought a m30 afm a 027. And i install it and everyting goes ok. Except that it wont rev past 5k without hitting a limiter. What should i do? Swap out the boards? Also when you swap out the boards do you swap out the connector also?

[Mystikal]

It's probably horribly out of adjustment, as it always is when people throw them in without a wideband.

Do the R3V thing, and play with the wheel until you think the A/F is correct.

Or, do it properly, and get on a dyno with a wideband and tune it right.

[e30 gangsta]

messed around with it for a bit. And then i noticed a rock stuck in it. So it didnt let the little thing slide all the way across. Now it works perfect no elctronics swap or anything. IM such a noob.

[nando]

It's probably horribly out of adjustment, as it always is when people throw them in without a wideband.

Do the R3V thing, and play with the wheel until you think the A/F is correct.

don't do this. afms are lazer toleranced and you'll likely fuck it up if you do.