Announcement

Collapse
No announcement yet.

Odometer/trip meter not working

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Odometer/trip meter not working

    So I am finally driving my E30 24v setup (working great) and put about 20 - 30 miles on it over the weekend. Realized that the odometer isn't turning. I drove again today to work and the trip meter (which I reset) read .2 miles but I drove an easy 15 miles. It read .2 miles for like... the entire duration so at some point something moved but obviously not reliably.

    Is it most likely gears? Anyone have any advice before I tear it apart?


    #2
    If it is not turning then either the motor is dead or the gears are broken. You have no choice but to take it out for a look.

    Comment


      #3
      Word, thanks!

      Is there a guide on motor/gear replacement?

      Comment


        #4

        Comment


          #5
          Thank you sir!

          Comment


            #6
            VDO or Multimeter? Most likely it's the gears. We have Multimeter gears and with your skills it would be an easy fix.

            Cheers,

            Jim
            sigpic

            Comment


              #7
              Not sure yet which cluster - will report back

              Comment


                #8
                Most likely gears but I just replaced an odometer electrical motor too. If you need help replacing the motor, send me a message.
                Owner - Bavarian Restoration
                BMW and European Electronics Repair and Restoration
                www.BavRest.com
                My Feedback Thread
                Our Facebook!
                Follow our Instagram!

                Comment


                  #9
                  I have a similar problem. I just replaced my gears for my motometer type setup. however it still does not work after putting it back together. I obviously need to take it back apart, is it common for the motors to actually go out? and if so, are they fairly easy to replace?
                  sigpic

                  Comment


                    #10
                    Not easy, complete disassembly required. Installation or manufacturing error are common.

                    I can run a odometer on my work bench so i know it will work for sure.
                    Owner - Bavarian Restoration
                    BMW and European Electronics Repair and Restoration
                    www.BavRest.com
                    My Feedback Thread
                    Our Facebook!
                    Follow our Instagram!

                    Comment


                      #11
                      Originally posted by Gregs///M View Post
                      Not easy, complete disassembly required. Installation or manufacturing error are common.

                      I can run a odometer on my work bench so i know it will work for sure.
                      So, I should double check my gears before anything else? and It couldnt be something easy, like a relay or fuse right?
                      sigpic

                      Comment


                        #12
                        Nope, odometer and speedo are on same gear. If both don't work, its probably a fuse. If one or the other do not work, something is wrong with those gauges or cluster main board.
                        Owner - Bavarian Restoration
                        BMW and European Electronics Repair and Restoration
                        www.BavRest.com
                        My Feedback Thread
                        Our Facebook!
                        Follow our Instagram!

                        Comment


                          #13
                          dang it. Thanks man^^
                          sigpic

                          Comment


                            #14
                            Originally posted by Gregs///M View Post
                            Nope, odometer and speedo are on same gear. If both don't work, its probably a fuse. If one or the other do not work, something is wrong with those gauges or cluster main board.
                            Correction

                            The odometer and speedo are not on the same gear but on the same signal circuit.

                            Just check the gears again
                            Owner - Bavarian Restoration
                            BMW and European Electronics Repair and Restoration
                            www.BavRest.com
                            My Feedback Thread
                            Our Facebook!
                            Follow our Instagram!

                            Comment


                              #15
                              Originally posted by Gregs///M View Post
                              Correction

                              The odometer and speedo are not on the same gear but on the same signal circuit.

                              Just check the gears again
                              I'll be doing that this weekend. Much appreciated.
                              sigpic

                              Comment

                              Working...
                              X