Starting problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dudoy
    Advanced Member
    • Sep 2012
    • 103

    #1

    Starting problem

    Hey guys,

    I have a 89 325ix and I have been starting issues for the past few months. At first I thought it was a battery so I replaced it but problems still continued a few days later. Lights would dim which led me to the alternator. After replacing it, I still have NO crank. I did a quick physical inspection and found this. I believe its the "fusible link" it was not connected to anything on the battery end and had a fuse on the other.



    Would this cause a NO crank? Also, how does one go about replacing this??

    NOOB NEEDS HELP PLEASE!! Thanks!
  • FLG
    No R3VLimiter
    • Sep 2011
    • 3165

    #2
    Looks like some kind of aftermarket wiring someone put in for something.

    Whats currently happening when you try to start it?
    -Build http://www.r3vlimited.com/board/showthread.php?t=295277

    Comment

    • dudoy
      Advanced Member
      • Sep 2012
      • 103

      #3
      Nothing. No crank at all.

      Tried charging the battery and jump starting it, still no crank. When I jumped it, the lights would come on then die out after trying to start it.

      Comment

      • SmokeE30
        E30 Mastermind
        • Jun 2009
        • 1730

        #4
        That wire is not stock leave it out. Check battery and ground connections and cables if your battery tests good
        Shawn @ Bimmerbuddies
        Bimmerbuddies LLC
        717-388-1256
        2971a Roundtop Rd, Middletown PA 17057
        bimmerbuddiesllc@gmail.com

        Comment

        • FLG
          No R3VLimiter
          • Sep 2011
          • 3165

          #5
          This an auto or manual? Do the rest of the electronics work? (lights, radio, ect)

          If manual have you tried pop starting it?
          -Build http://www.r3vlimited.com/board/showthread.php?t=295277

          Comment

          • Gregs///M
            Forum Sponsor
            • Mar 2012
            • 2459

            #6
            There is a diagnostic plug on top of the motor. You can jump start the starter by jumping two wires. Google search M20 diagnostic plug and you will see a electrical pinout and diagram.

            Or you can jump the starter directly to see if the starter has failed or not. You might just have a bad starter.

            Also, very important, check the condition of the engine ground cable from the oil pain the frame rail on the drivers side. This is the ground cable for all engine electronics including the starter. If this cable is dirty, corroded, oxidized and in overall bad condition or loose, it will cause all kinds of problems including no start.
            Owner - Bavarian Restoration
            BMW and European Electronics Repair and Restoration
            www.BavRest.com
            My Feedback Thread
            Our Facebook!
            Follow our Instagram!

            Comment

            • dudoy
              Advanced Member
              • Sep 2012
              • 103

              #7
              This is an automatic.

              Thanks for the help! I will check everything you guys recommended and let you guys know.


              I appreciate it!!

              Comment

              • FLG
                No R3VLimiter
                • Sep 2011
                • 3165

                #8
                Also try starting in neutral, sometimes the neutral safety switch could go bad

                Sent from my Galaxy Nexus using Tapatalk 2
                -Build http://www.r3vlimited.com/board/showthread.php?t=295277

                Comment

                • dogsbark26
                  E30 Addict
                  • Nov 2008
                  • 533

                  #9
                  Progress?

                  Comment

                  Working...