Announcement

Collapse
No announcement yet.

all my gauges went out.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    all my gauges went out.

    everything stopped working instead of the speedo. is this a fuse that has gone out?
    1984 Eta
    1987 Bagged
    1988 I
    1995 MX5
    1998 C70T5M
    2002 CL600

    #2
    The fuses would be the first thing to check.
    The car makes it possible, but the driver makes it happen.
    Jim Levie, Huntsville, AL

    Comment


      #3
      definitely the fuse, had the same thing happen to me.
      I like cats.

      Comment


        #4
        Fuse 10, 12, 21, all 7.5A. Just change them all.
        Owner - Bavarian Restoration
        BMW and European Electronics Repair and Restoration
        www.BavRest.com
        My Feedback Thread
        Our Facebook!
        Follow our Instagram!

        Comment


          #5
          ill try that
          1984 Eta
          1987 Bagged
          1988 I
          1995 MX5
          1998 C70T5M
          2002 CL600

          Comment


            #6
            update- replaced the fuses with 10 amp. started the car like usual with everything working. as i start moving fuse blows and everything goes back the way it was.

            any suggestion on where i should start my search for a short?
            1984 Eta
            1987 Bagged
            1988 I
            1995 MX5
            1998 C70T5M
            2002 CL600

            Comment


              #7
              Using the wiring diagrams from http://wedophones.com/BMWManualsLead.htm, start trouble shooting the circuit that fuse feeds.
              The car makes it possible, but the driver makes it happen.
              Jim Levie, Huntsville, AL

              Comment


                #8
                thanks man
                1984 Eta
                1987 Bagged
                1988 I
                1995 MX5
                1998 C70T5M
                2002 CL600

                Comment


                  #9
                  Edit
                  Last edited by SLEEPYDUB; 07-12-2013, 03:44 PM.
                  - AXIS POWERS - 2JZ E30 Build
                  Current Project - 87 325is 2JZ Swapped with M4 DCT

                  Comment


                    #10
                    checked the wires coming from the shift hole, one was slightly stripped and shorting out. taped it up replaced the fuse and hasnt happened again
                    1984 Eta
                    1987 Bagged
                    1988 I
                    1995 MX5
                    1998 C70T5M
                    2002 CL600

                    Comment

                    Working...
                    X