S52 cams

[ForcedFirebird]

The s/m52 uses 33mm lifters and different trays, you can't compare m/s50 cam to m/s52. If you put m/s50 cams in an m/s52 with the 33mm lifters, the valves will always stay slightly open. The motorsport parts have a lot more duration and are visible that the tip of the lobe if "fatter".

[xoneslosentrax]

Yea I know that part. I was going to use the m52 trays with lifters not the m50. I was just trying to compare lobs

[xoneslosentrax]

Here is a better pic of the so called s52 cam that I got from a forum member

[xoneslosentrax]

Please let me know what y'all think cuz I might be returning it tomorrow. He's refunding my money back but I just want to make sure if someone can really help me out on this

[Wishno87]

Put an intake cam from an m52 right next to that one and look at them. The m52 cam should be noticibly pointier.

[ForcedFirebird]

Difficult to tell from pics without a comparison. :(

[xoneslosentrax]

M52 on the right

M52 on the bottom

[ForcedFirebird]

hmm

[ForcedFirebird]

Not in person, but measure the lobes on max diameter, then min diameter on both. Pics can be deceiving

[ForcedFirebird]

Rusty cam looks to have a smaller base circle.

[xoneslosentrax]

Here are a couple more pics

M52 cam

[xoneslosentrax]

Well I just shipped them back to the guy I got it from. So neveind now