Turn Signal Problem

[Jrssampson]

My front left turn signal does not work. I have replaced the bulb and fuse, neither helped.

[FLG]

What does it do?

Sent from my SCH-I545 using Tapatalk 2

[itskingsteelo]

My turn signal has a problem too, when i put it on it clicks way too fast

[FLG]

Most issues are due to dirty connections or bad bulbs.

Clean all bulb sockets and replace the bulbs

Sent from my SCH-I545 using Tapatalk 2

[itskingsteelo]

sometimes when I click it on, it clicks normally but sometimes its too slow or too fast

[mitchlikesbikes]

your flasher might be bad or have dirty connections. get to that and make sure it's clean too. it's plugged in to the turn signal switch harness inside the steering column cover thing

[noid]

My turn signal has a problem too, when i put it on it clicks way too fast

That means one of your bulbs is out in the direction where it clicks to fast.

[Sea Aych]

My turn signal has a problem too, when i put it on it clicks way too fast

Grounding issue. Had the same problem numerous times. Clean the connection in the light housing itself. If that doesn't work, check the connections on the other end, at the turn signal stalk end.

[theKrampus]

I'm surprised no one has mentioned the relay?

[FLG]

I'm surprised no one has mentioned the relay?

If it's only one side it wouldnt be the relay.

Sent from my SCH-I545 using Tapatalk 2

[Reignity]

I've had this issue once after a rainy night. Just turned out to be a dirty connection since the lights don't seal. Unplugged the lights, checked the pins, plugged it back in, and then it worked.