Announcement

Collapse
No announcement yet.

Ac compressor issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Ac compressor issue

    My Ac compressor stopped working today and i have tracked it down to a damaged wire off the right side of the Compressor I believe is it the temp sensor see item 5 in the diagram.


    If i press on the wires the Compressor kicks on.

    My question is can i remove this sensor without draining the refrigerant or do i have to drain it in order to replace it?

    #2
    The sensor on the side of the compressor can be removed. It is only mounted to the housing. The sensor on the pre-1989 receiver-dryer are the ones that will open the system.

    Comment


      #3
      Thank You for the help.

      Comment

      Working...
      X