Announcement

Collapse
No announcement yet.

3rd brake light bulb removal help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    3rd brake light bulb removal help

    Hi all. I've been doing a ton of searching on how to replace this bulb. Now, I've gotten the cover on it off but I cant seem to get the bulb out. I pulled the connector and the pin out on the bottom of the bulb but i cant get the pin out from the left side... Am I even supposed to remove it? Am I missing something here?
    Thank you for any help and I hope I posted this in the right place!

    #2
    Sedan/coupe or vert?
    ACS S3 Build / Dinan 5 E34

    Comment


      #3
      Originally posted by TimeMachinE30 View Post
      Sedan/coupe or vert?
      Its a coupe.. I didn't know there was a difference?

      Sent from my LGLS990 using Tapatalk

      Comment


        #4
        You change the bulb from the trunk not inside the car. And if you had a vert the 3rd brake light is on the trunk lid not inside the car.
        Current
        99 328i (Sold)
        91 318is M50B25TU
        89 325ix (Parted out)
        87 325is (Parted out)
        95 525i (Parted Motor for 91 318is)

        Comment


          #5
          Yup- there's a hole in the trunk directly under the bulb...

          t
          now, sometimes I just mess with people. It's more entertaining that way. george graves

          Comment


            #6
            Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users.

            There's no access from inside the trunk. I said I had already gotten to the bulb.. I just can't get it out.

            Comment


              #7
              Looks like your going around your elbow to get to your asshole.

              And certainly a big difference between vertical and non vertical which is why I asked. The difference, while obvious, was previously answered.

              In that photo of yours, it looks like you are pulling out the bulb from the base?? The bulb is between the red lens and that black curved piece. Trying to pull the bulb through the hole where the base mount?
              ACS S3 Build / Dinan 5 E34

              Comment


                #8
                The pic of from the back seat. I see the bulb but don't know how to pull it out. I don't understand what you are asking?

                Sent from my LGLS990 using Tapatalk

                Comment


                  #9
                  That's an early car?

                  I have absolutely no memory of the 3rd brake light looking anything like that...
                  it looks like you have to remove the whole housing then?

                  t
                  now, sometimes I just mess with people. It's more entertaining that way. george graves

                  Comment


                    #10
                    Then looks like theres a clip on either end, should unclip the full housing

                    Comment


                      #11
                      Figured it out. The whole thing slides off backwards from the base. Then there's a tab on each side and the bottom you have to press. Then it was just a matter of sliding the inside part out of the housing. The bulb is removed from the inside.
                      Thanks for all the help!

                      Sent from my LGLS990 using Tapatalk

                      Comment


                        #12
                        Crazy. What year is your car?

                        t
                        now, sometimes I just mess with people. It's more entertaining that way. george graves

                        Comment


                          #13
                          It's an 88 seta

                          Comment

                          Working...
                          X