Tips on removing foam from under tool tray?

[mike87]

Hi all, I removed the tool tray in my trunk and need suggestions on how to remove the leftover foam stuck on my trunk lid (see pic below):




Thanks in advance

[uturn]

Try brake cleaner.

[101]

"goo gone", a plastic scraper and a lot of effort worked for me when removing the foam hood insulation glue off my IX.

[djjerme]

Acetone should dissolve the foam and the glue. But be careful and clean it immediately off the paint. Maybe even clear coat the paint again to seal it up.

[jeffnhiscars]

acetone is a little too aggressive for my liking to use near paint plus it could dissolve your trunk carpet. Mineral spirits should dissolve the glue and not hurt anything