What will be the symptoms of the relay not doing it's job? Poor fuel economy or is there more to it?
Announcement
Collapse
No announcement yet.
If your O2 sensor relay does not work...
Collapse
X
-
What if i have the CEL at idle, blip (with severe hesitation) and it goes away and stays away... Same thing?
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
It is possible that it is the same. One other way to tell if your o2 is bad is to smell the exhaust. It would have a rich sulfer kinda smell to it if it is running rich.Originally posted by cabriodster87"Honey? What color is this wire? Is it the same as that one? Are you sure? I don't believe it. OK, it works. Thank you sweetie."Originally posted by Kershawi've got a boner and a desire to speed.
Comment
-
I dont have the sense of smell :( and my exhaust exits somewhere under the car for the most part anyway :(X2
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
Yeah well i get a CEL at idle and poor off idle performance so... Im thinking thats my issue, that or the O2 Is dead all together...
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
Originally posted by hendrixvodu View Postim having a prob with mine....when mine is plugged in the car bucks very badly and cant idle at all....but when i unplug it the car runs fine???? any idea what that could be??????
and its a new sensor
My 85 318i did the exact same thing. My solution?............
Yank the m10 and prep for s52. Hope this helps.
Comment
-
Haha S52 FTW. Could be a bad connection or bad relay. When its unplugged the ECU just runs in open loop which is bad for fuel economy but yeah.
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
Originally posted by Farbin Kaiber View PostMy 85 318i did the exact same thing. My solution?............
Yank the m10 and prep for s52. Hope this helps.
oh shit my s52 is on layaway .......damn sears!-His-
87 e30 325i
87 e24 m6
05 e83 x3
94 e32 740i 5spd
-Hers-
89 e30 325i
18 f48 x1
- Likes 1
Comment
Comment