PN for front undertray (?)
Collapse
X
-
deal! let me dig it out and make sure it's the one you were looking for 100%. it came off of an early 318, so who knows if it's the same. i'll pull it out either tonight or tomorrow and take pictures. i dont want you to drive all the way down here for nothing
Originally posted by ROLLingKINGi have a bronzit and plan on making it look sweet.Originally posted by slammin.e28Moral of this story?
If you drive your e30 on stairs, you're gonna have a bad time.Comment
-
Awesome, lemme know.I Timothy 2:1-2Comment
-
here's the one i have:
http://min.us/i2DBq.JPG this is the side that faces the motor (i think)
http://min.us/i7apE.JPG here is this other side. this came off of an early 318i, so i have no idea what it will fit on.
Originally posted by ROLLingKINGi have a bronzit and plan on making it look sweet.Originally posted by slammin.e28Moral of this story?
If you drive your e30 on stairs, you're gonna have a bad time.Comment
-
Comment
-
I can tell you this, Luke and my cars (87IS's) have a modified undertray that is becoming super rare due to the ductwork for the brakes. anything else would be similar to the picture above.
Mine was prestine up until about a month ago when I hit a retread in Macon, not only half of it is prestine. Sux.Yours truly,
Rich
sigpic
Originally posted by Rigmasteryou kids get off my lawn.....Comment
-
so the one for luke is for an 87 is? I assume the one I own was for an 87is because the 87is didn't have brake ducts but still a slightly differ valence than earlier modelsComment
-
Comment
-
And it was way different, it was only added on here in the US. They were put on after the cars were delivered here. The undertray looks somewhat the same, but the sides are removeable from the bottom, they actually screw into the brake ducts. Let me see If i can find a picture.Yours truly,
Rich
sigpic
Originally posted by Rigmasteryou kids get off my lawn.....Comment
-
yeah that be great. I ordered one but I'm not sure how it looks and I want to cancel right away if I didComment
-
Well, this is the side of it in the wheel well, do you see how there is a cut out for the duct? that duct actually runs along the undertray and fits into the lover section of the valance, where the slots are under the fog lights. I doubt the fit will be the same if you didn't order this one, however, I am sure it would work. Still looking for a better pic.Yours truly,
Rich
sigpic
Originally posted by Rigmasteryou kids get off my lawn.....Comment
-
-
It didn't come from the factory like that, it was cut here in america by the company that added the 87 fairing, or by BMW NA.Yours truly,
Rich
sigpic
Originally posted by Rigmasteryou kids get off my lawn.....Comment


Comment