PN for front undertray (?)

[structured]

^ My 87is has this as well. The hole through the wheel well looks like a three year old cut it. Clearly not done at the factory.

[bmwstephen]

The 87 Is did have brake ducts. If it has this fairing, it had ducts.

I think thats because you have that bumper. but with the stock valence, it shouldn't have had brake ducts cut into the tray I believe

[delatlanta1281]

This is the stock valence and bumper for the 87IS. If you do not have an 87 IS you need not worry.

[delatlanta1281]

^ My 87is has this as well. The hole through the wheel well looks like a three year old cut it. Clearly not done at the factory.

Do you have the brake ducting as well? I will take a picture of one of my ducts so you guys can see them.

[idickers]

Bringing back on old thread. I have this piece on my '91 318is, but have lost the fasteners. It is held on to 4 coarse-threaded studs, and also with 4 small sheet metal screws that are small diameter with attached washers, I think.

I cannot find this part (51.71-1961.999.0) in any BMW database (dealer included) to figure out the fasteners (it is not #51711943106, as previously suggested). Can anyone help out with the fastener specs?
Thanks in advance for any suggestions.

[BMW_325i]

I have part # 51711965899 coming up in realoem for the cover.

See this diagram for related fasteners

http://bmwfans.info/parts/catalog/E30/4-doors/Europe/325i-M20/RHD/M/1987/october/browse/vehicle_trim/heat_insulation/