Question: Crush Washer p/n for Steering Lines

[cory58]

I'm replacing the power steering lines and banjo bolts on my Touring. The parts are interchangeable with a USA 325i. Below are the Touring diagrams from RealOEM. Part #3 is the 16mm banjo bolts and part #6 is the 14MM banjo bolts. I also want to replace the crush washers for all the banjo bolts. The 16mm crush washers (part #2) are grayed out on the diagram and have no part number. The corresponding USA 325i diagram incorrectly lists a 14mm crush washer for the 16mm banjo bolts.

I did find 16mm crush washers on a 325ix diagram with the following part number: 32411093597 . Can anyone confirm that this is the correct part number for 16mm crush washers? If not, can anyone please provide the correct part number?

Thanks, Cory

power steering lines diagram by cory58f5, on Flickr
power steering lines parts list by cory58f5, on Flickr

[cory58]

I went ahead and ordered the p/n above and installed the new power steering lines yesterday. The 16mm crush washers fit perfectly, so in case anyone finds this thread in a search:

YES, part 32411093597 is the correct 16mm crush washer for the power steering lines.

Cory

[318aye]

Used this info tonight, thanks for following up!

[zadma]

any thought where to purchase the smash washer/seals for the force controlling line on the fronr of the siphon? mines been releasing a tad for some time and I need to transform them previously/while I change the liquid. much appreciated.
Kodi nox