going with the e36m3 fronts. Would like to keep the wheel offset (and wheelbase) the same front and rear (et40.) What do you recommend for the rear? z3 2.8 hubs? z3 1.9 hubs? or ??? will my e30 m3 axles fit right into them? thanks, jason
Announcement
Collapse
No announcement yet.
5 lug rear ??
Collapse
X
-
Originally posted by Aptyp View Post
Goals:
larger (stock 86+ 325) rear bearings
offset to match the front (et40)
track width to be the same front and rear.
after reading the html about a million times, i just get more confused. I would assume I should use the (I6)z3 hubs, stock bearings, 325i trailing arms. will my track width be the same (within a few mm) as the front?
What halfshafts???? the e30 and e36's have different abs rings. So, should I just replace the rings? new halfshafts?
thanks, jason
Comment
-
Originally posted by Jason89i View Post.... I would assume I should use the (I6)z3 hubs, stock bearings, 325i trailing arms. will my track width be the same (within a few mm) as the front?
What halfshafts???? the e30 and e36's have different abs rings. So, should I just replace the rings? new halfshafts?
Comment
-
Originally posted by Jason89i View Postgoing with the e36m3 fronts. Would like to keep the wheel offset (and wheelbase) the same front and rear (et40.) What do you recommend for the rear? z3 2.8 hubs? z3 1.9 hubs? or ??? will my e30 m3 axles fit right into them? thanks, jasonOriginally posted by Matt-Bhey does anyone know anyone who gets upset and makes electronics?
Comment
Comment