Rear from z3-m coupe

[kuerone]

Hey,

To trailing arms from z3-m coupe/roadster i have to use half-shaft and differencial from this model?

I look for different solution... Maybe this:

differencial from e36m3 and half-shaft from e36m3.

Ok but.
Half-shafts from e36m3 - Maybe they are too short/long for trailing arms z3m- coupe/roadster.
Hubs - If I use these from z3-m coupe/roadster they will be fit to half-shafts from e36m3?

I thought also to put hubs from e36m3 to trailing arms from z3-m coupe/roadster (they have the same size of brakes) use half-shaft from e36m3 and differencial from e36m3.

Very nice set ;)
Someone did something like this? All will fit?

Thanks for help!!


Cheers
Michael.

[Dagamus(NM)]

You need the whole rear end from the m-coupe with the e30 subframe.

[MR 325]

E36 M3 and M Coupe half shafts are the same. Also, the E36 M3 differential will not fit.

[E30-323ti]

You can use the E30 (188 ) diff, you need a pair of output flanges from an E28 to match the M-Coupe Axles.

[kuerone]

Ok, thanks guys. Helpful.

Cheers,