UUC - Big Brake Kit - Direct Fit caliper, 11.75" rotor

[guibo09]

oh my that's alot of rotor!

[onaquest]

i hope these fit under my rs003's Im going to use the template to verify.

[Wh33lhop]

Nice. Looks like 195/55 R888s in front, 225 or 235/50s out back (mega reverse stretch)?

Looks good. Not huge or anything, but definitely noticeable if you're paying attention. I may be picking up a set in a few months, we'll see.

[Rob@UUC]

Nice. Looks like 195/55 R888s in front, 225 or 235/50s out back (mega reverse stretch)?

Looks good. Not huge or anything, but definitely noticeable if you're paying attention. I may be picking up a set in a few months, we'll see.

Good eye! You're right, Toyo R888 195/55-15 front, 235/50-15 rear.

[alexbaby88]

Can someone confirm if this kit will fit under the BBS RS001 or the one pc 15" x-spokes?

[alexbaby88]

Rob

I have a Girling piggyback booster (iX?) and E32 master. How will this combo work with your UUC BBK?

[IDM]

Will a similar kit be offered for the e30 M3? What I don't like about this kit is the flat hat and the fact that it it's not anodized. Looks kinda cheap compared to Massive's. I do like the price and the CS provided by UUC.

[Rob@UUC]

Rob

I have a Girling piggyback booster (iX?) and E32 master. How will this combo work with your UUC BBK?

Should work perfectly fine. I have an older version of our kit on my '89 iX.

[Rob@UUC]

Will a similar kit be offered for the e30 M3? What I don't like about this kit is the flat hat and the fact that it it's not anodized. Looks kinda cheap compared to Massive's. I do like the price and the CS provided by UUC.

We already do make an E30 M3 kit with an Alcon caliper and 13" rotor that is distributed exclusively through Elephant Motorsports.

The standard E30 hat that we make appears flat to add material for strength where the mounting hardware for the rotor disk is located. As with everything we manufacture, strength is a primary concern. The hats could be anodized if requested, or the end user could simply use some flat high-temp spray paint (as we've seen some customers do) with very satisfactory results.

UPDATE: For new orders, we are offering the option of anodized calipers in either black or red. Keep in mind that anodizing has a somewhat different appearance than powdercoating, showing more of the machined finish/texture of the caliper body.

[onaquest]

PM sent to you Rob

[dinanm3atl]

Should work perfectly fine. I have an older version of our kit on my '89 iX.

Well that is good because I have iX and E32 master :)

[Rob@UUC]

PM sent to you Rob

Got it, replied!

For the other inquiries I've been getting regarding the appearance of the anodizing, here's a close-up of a test part:

RED ANODIZING:

[Philo]

/\ Now that is taking constructive criticism and working with it. From the website it looks like the anodized calipers are at no extra cost. :up: I think the black anodized would look very nice. Can we get a picture of that, as well as a side-by-side to the stock rotor and caliper size?

[Mr Two]

Got it, replied!

For the other inquiries I've been getting regarding the appearance of the anodizing, here's a close-up of a test part:

RED ANODIZING:

Gotta let those calipers breathe man! ;)

Any chance of custom colors for anodizing too?

[Rob@UUC]

/\ Now that is taking constructive criticism and working with it. From the website it looks like the anodized calipers are at no extra cost. :up: I think the black anodized would look very nice. Can we get a picture of that, as well as a side-by-side to the stock rotor and caliper size?

Sorry, I don't have pics of the black anodized at the moment. The pic is a sample we did on a prototype caliper (not suitable for sale). We're in production on calipers right now (as the first production run sold out a week ago), so when more are done, I'll post complete pics of all the colors.

I'll see if we can post some pics tomorrow of the BBK and OE calipers behind the same D-Force wheel.