cheapest big brake kit?

[bmwdude]

Can anyone steer me to the cheapest big brake kit out there?

Thanks!

[Jordan]

IE

[Skafrog]

I heard through the grapevine that Corrado front brakes will work on our cars with modification.
Check that out,

[bmwdude]

I heard through the grapevine that Corrado front brakes will work on our cars with modification.
Check that out,

Yes, I have heard that too....also heard earlier 4 bolt Chrysler stuff will fit too. Question is who has had the time out there to mix and match nice large rotors with 2-4 piston calipers etc, and make it all work. The IE kit sounds good with the Vette calipers and 310mm rotor size. $1250 is alright, but I have to deal with a lousy exchange rate (as you US guys are now getting a taste of it too with the Euro). I was just kind of hoping for a SLIGHTLY cheaper alternative. I just don't have the time and/or a CNC machine to experiment with parts from the junkyard, otherwise I would.

[DanGillan]

check out movit

[royalflush313]

check out RPI Equipped in Vancouver, BC. They have their bbk using wilwood calipers.

[rs4pro3]

:Edit:

[bmwdude]

check out RPI Equipped in Vancouver, BC. They have their bbk using wilwood calipers.

These guys seem to have the lowest prices. Thank guy!

[bmwdude]

I'll confirm Corroda rotors fit(have to machine out the center bore). And there is a set of cheap 4-piston calipers that will fit with a simple Bracket

Sounds good!!!.....and I anxiously await!!!!

[Streetspec_iS]

I heard through the grapevine that Corrado front brakes will work on our cars with modification.,

anything will fit with modification.

[Rob]

quality pads, fluid, lines, and bleeding are truly the cheapest brake upgrade. doesnt really help in show points though

[Mtriple]

I ordered the last kit on hand at RPI last Wednesday. Warren said that they would consider doing a run again if there was enough interest. They have to order a minimum of 10 from their fabricator so I'm not sure what he is looking for in terms of a "minimum" amount of interest...

[bmwm3n528]

I ordered the last kit on hand at RPI last Wednesday. Warren said that they would consider doing a run again if there was enough interest. They have to order a minimum of 10 from their fabricator so I'm not sure what he is looking for in terms of a "minimum" amount of interest...

You make me sick :D

That's going to be such a sick e30.

[JPbmw]

I'll confirm Corroda rotors fit(have to machine out the center bore). And there is a set of cheap 4-piston calipers that will fit with a simple Bracket

i thought all this was still a secret :?

[mikeedler]

rs4pro3 wrote:
I'll confirm Corroda rotors fit(have to machine out the center bore). And there is a set of cheap 4-piston calipers that will fit with a simple Bracket

i thought all this was still a secret

well, dont hold out, what is it and what do we need?