RX7 caliper and bracket Roll Call

[Luis325]

^^ bump

[Luis325]

Bump
Looking to buy some 17" x 7.5 BBS rs style reps or BBS LM style wheels
Any info on this setups??

[brent5631]

Anyone find a decent matching rear bigger brake rotor upgrade kit to match the rx7 front setup?

Sent from my GT-N7100 using Tapatalk 2

I am working on e46 323 rear brakes. Will give stock bias with rx7s up front.

[Luis325]

Any idea if they fit with konig remembers 16"

Thanks

[bimmerboy4444]

my solution to the problem was not to mess about i have 17x7.5 40 offset tsw not sure the model summer and 16x7 40 offset core racing evo-7 winter(never by these rims unless you work for kal tier) and 25mm spacers both were 40 offset and fit, the tsw were dam close less then 2mm Clarence on the spokes. my new rims are axis og europas 17x8 25 offset and don't fit with out the spacers witch made the fitment abit tight and needed some fender reforming not much but it needed to be done.

[Wanganstyle]

Original is 60/40. The bias is not ideal but is not terrible. I can lock up the fronts first.

Agreed: fronts lock up first and rear brakes are under utilized; raced last weekend at infineon on the rx7 front setup.

Adjustable bias valve will go in next; braking is not even and it was hard to step the tail out with braking.

The rx7 calipers actually clear our 15x7 Koenig wheels

Anyone find a decent matching rear bigger brake rotor upgrade kit to match the rx7 front setup?

Sent from my GT-N7100 using Tapatalk 2

[Luis325]

Fuck theres no way to fit my 16" redrilled style 5's with these brakes!!!!!??????

[brent5631]

Original is 60/40. The bias is not ideal but is not terrible. I can lock up the fronts first.

[Wanganstyle]

What was the original e30 f/r brake bias before rx7 calipers?

Have the setup just wondering what will happen when we go on track with it

Sent from my GT-N7100 using Tapatalk 2

[brent5631]

Has anyone calculated the effective bias post 4 pot rx7 converion.w rear oem brakes?

Sent from my GT-N7100 using Tapatalk 2

I calculated it to be 70/30 f/r

[E30_pilot]

Yes you have to trim your dust shield.

[MonkeyMan]

I ordered the caliper brackets from these guys:

https://sites.google.com/site/e30brakesolutions/home/E30_RX7_CORRADO

and this might be a dumb question, but the other day I was trying to do a test fit to see if these things will clear my 15x7 et24 Euroweaves, and I couldn't get the caliper + bracket onto the spindle because the dust shield behind the rotor is in the way. Does this need to be cut down or removed for this to work??

[Wanganstyle]

Has anyone calculated the effective bias post 4 pot rx7 converion.w rear oem brakes?

Sent from my GT-N7100 using Tapatalk 2

[thirdlobe]

Sorry for brining back an old thread but does anyone sell these kits anymore? Looking for my 91 318is.

[pandaboo911]

Yes please somebody show how much they protrude from the rotors face (hub)