RX7 caliper and bracket Roll Call

[E30SPDFRK]

How far do the calipers stick out from the hub? Someone stick a tape measure on it and take a picture.

[Wild Ride]

Hello everyone. I am new to r3v. I wanted to know if my alpina 16x7 et28 wheels will clear the rx7 BBK or if I will have to get spacers. I am really interested in the kit. https://sites.google.com/site/e30bra...30_RX7_CORRADO

Anybody have success fitting these behind real 16" alpinas?

Here is an Idea lets get a printable template going to check wheel clearances.

Also what is the typical cost for machining the rotors 1mm to fit the hub?

[amazo]

I am noob at BBK (plus I am new to BBK) I am going to be installing my BBK and will need new rims and tires. I was hoping that 15 x 8 +25 would be able to fit 280mm kit. Here is a link to the rim I was looking at.

http://passwordjdm.com/Stance-Mindse...7345C2104.aspx

[einstein57]

I think you should just buy mine. Just run a 15mm spacer to bring the fronts out flush

[Robert]

getting another set.

[einstein57]

Didn't you sell yours?

[Robert]

Very Interested in the esm 002 et 15 16x9 fit.. anyone?

[Robert]

My TRM C1's 15x8 clear perfect with a 5mm spacer, no grinding down or anything.. theirs about enough room to fit a pube in there.

[Chico335i]

How much does RX7 calipers intrudes with the offset of the wheel, I am planning to use AZEV type A 16x7.5, ET 20.

[einstein57]

They fit BBS RC090s (e39 style 5s) with 22mm spacers. If your going to run the thin spacer behind the rotor then 20mm spacers should do the trick.

[graphikg]

I bought them from 2002 Maniac's site. They just came as the FD Model. I like the look of them more but definitely took more grinding work.

[Wanganstyle]

You must have the FC turbo caliper version. I think I have the FD calipers which do not have the nub... I think theyre a little different.

See...no nub - the design is quite different.

Curious why did you pick FD calipers over FC? The pads are interchange, and apparently the calipers are the same pattern. are they both alu construction or is the a FD steel caliper?

[graphikg]

You must have the FC turbo caliper version. I think I have the FD calipers which do not have the nub... I think theyre a little different.

The FC calipers



FD


See...no nub - the design is quite different.

[FrozenSolid]

They do fit trm c1 15x8 i have run them with no spacer, i have the nub on the caliper ground down almost all the way. Ill put some pics up when i get on my computer

[graphikg]

I am very very sorry to say... But these calipers DO NOT fit the TR Motorsport C1 15x8 wheel without issue. Ive ground the hell out of brand new calipers and am still having trouble. They absolutely need spacers of at least 5mm. I am having a lot of trouble fitting these wheels onto the calipers. It is quite frustrating. I am even thinking that I need a 10mm hubcentric spacer and even needing to buy some studs.