RX7 caliper and bracket Roll Call

[graphikg]

BTW do you happen to have extra fittings that I would need to use to get the E30 brake lines to fit the rx7 calipers?

I am also interested in this info. And would these brakes fit with the TRMotorsport C1 15x8s?

[2002maniac]

will be putting the later style rx calipurs with my keskin kt1's real soon. 16x7.5 et20. im grinding off the mazda portion and step out too. will get as many detailed pics and info as i can.

Did you get them to fit the Keskins? I always loved those wheels. Be sure to post some pics!

[imwhyteyo]

will be putting the later style rx calipurs with my keskin kt1's real soon. 16x7.5 et20. im grinding off the mazda portion and step out too. will get as many detailed pics and info as i can.

[reelizmpro]

Anyone fit these behind euroweaves yet??? they are 15x7 ET24. I'm thinking I need a 8-10mm spacer.

[Dissembler]

I also just got my spacers in to run Esm 008 16x9 et15 so I'll try to get pics in later.

Did you ever fit those esm 008? Interested in those rims myself. What tire size are you running?

[MR 325]

won't the turbo car need some buggbreaks?

Damn it...

[2002maniac]

Offset is really not as much of a factor as the internal spoke design. Wheels with concave spokes will have more caliper clearance than deep dish style wheels regardless of offset.

That said, I don't think the XXR 16x8et0 was designed with brake clearance in mind.

There's no need to mess with the ABS when running this setup. Stock rotors are 265mm

[racingwoody]

So I always get confused with offsets. I run a 16x8 xxr i think they are 002's with a zero offset. Will this work better with these brakes or will I need huge spacers to make work? Also do you run the stock ABS with this set up? And finally I believe the rotor size used is a 280mm with these rotors, what is the stock size rotor?

Thanks for the help.

[2002maniac]

I have an extra set of brackets and line adapters if anybody is interested. ;)

won't the turbo car need some buggbreaks?

[MR 325]

I have an extra set of brackets and line adapters if anybody is interested. ;)

[2002maniac]

Are you guys using a proportioning valve and if so what kind of bias are you using?

i originally had a bias valve on my black car, but ended up running it all the way open so it really wasn't doing anything. With similar pad compounds in front and back, the bias is just fine.

[2002maniac]

Sweet. Thanks guys!

I just updated the list and added the pictures. :)

[Dissembler]

Here's a pic of my setup to add to the site (Konig Lightning)

I used the e34 M5 master cylinder (25mm i think?) Pedal is stiff and feedback is awesome. Shitty pads hindered me at the track but overall i was quite happy.

[E30_pilot]

Ok guys I started a wheel fitment database and hosted it on my website. Let me know if you have any additions.

I submitted that TR Motorsports 15x7 et20 would fit with a 5mm spacer,but couldn't put a picture up.

But here is the pic you can use on your site:


I also just got my spacers in to run Esm 008 16x9 et15 so I'll try to get pics in later.

*just noticed on your site you needed pics/write-up of the install? If you still need someone to do it, I'm game. My car ain't going anywhere til my m50 swap is done and being unemployed gives me lots of free time lol

[sennafan]

Are you guys using a proportioning valve and if so what kind of bias are you using?