will this master cylinder fit my car?

[hooken m]

http://r3vlimited.com/board/showthread.php?t=198195

this is the one that i want to buy. my main concern is if it will properly fit on my 87 325. im not 100% sure if that master cylinder is identical to the e30 m3 master cylinder. and if so, what modifications must be done in order for it to fit on my car. i heard you have to slightly bend a hard brake line, but thats it. thanks for the help as always

[Bmjpv]

I think m3 e30 are 23mm, that is a 25 which came off the bigger cars. It will bolt up but pedal pressure might be very hard. some like it, some don't. I used that master on my 88'Is 24v but I'm running M3 e30 brakes all around and really like the way it worked out for me. Joe

[hoveringuy]

With stock e30 calipers it was firm. It's a matter of preference.

[Adrian_Visser]

So that one fits with the stock booster? I thought that the 25mm MC would only fit on an IX booster.

[2002maniac]

Yes it will fit.

[Holland]

So wait, it's the same for ABS and non ABS cars? I want to put one of these on an early 318i, I did a rear disc conversion and the pedal is too soft for my liking.

[2002maniac]

You'll need a tee for the front brake lines as mc on abs equipped cars have only 2 outlets.