IE BBK fitment guide

[dmoney(AB)]

Any one else running 17s with these brakes?

[dmoney(AB)]

Anyone?

[cbouchez]

I'll be ordering a set soon fronts only-

I'll be running 17" all year around. My stock 14's will be in storage for now....

Any input between the 310 vs 295

Street driven

[nl328i]

Success!

Do you have any info about acs 16x7.5 et25?

For anyone interested the 310mm front kit fits without spacers on these wheels!

[Aviator]

Looking at the 295mm set with my 15x7 BBS RZ's et 20.

[fporro]

Aloha,

Have great news, SSR Mesh do fit IE's 310mm 6 pot Wilwood calipers,
be it 16 or 17 since they share same centers.,
this ones here, already picked up 16x8et13's (5 lug's) fr the barrels :) ... http://www.bimmerfest.com/forums/album.php?albumid=8198

4 tabs were not cooperating so file them down jut a bit, all others had enough clearance,
turned centering ring about but that was not the problem, issue is in the casting.







plenty of clearance ...



no clearance

[Zesty Bonanza]

Does the front Wilwood 310mm kit fit fine with Hartge Type A (4x100) wheels?

[fporro]

Does the front Wilwood 310mm kit fit fine with Hartge Type A (4x100) wheels?

yezzzzz ;)

whole album here, plenty of backspace and just wide enough :devil:

[Zesty Bonanza]

Thank you fporro!

[Braziliangabriel]

My 310mm set is coming in tomorrow. I have style 32's. I'll post pics when after I install everything.

[b-rad]

old thread but, I have 16 x 8 Style 5.
was thinking massive but no longer avail, as I have a swapped M3 suspension.
IE looks like the only option with 16" rims.
Any others to look at?

[Staszek]

old thread but, I have 16 x 8 Style 5.
was thinking massive but no longer avail, as I have a swapped M3 suspension.
IE looks like the only option with 16" rims.
Any others to look at?

Old thread but figured I would add. I just put in the IE 16" kit behind E38 Style 5's fill and drill so original et 23 offset. Clears with no issues!

Front


Rear

[ba114]

Old post i know, but can someone please shed some light on what model wilwood calipers are used in the IE 310 6 pot dynapro kit?
Buying the set from USA and shipping to Australia is killing me in

[einstein57]

The part numbers were in my original post but Photobucket took care of that :/

[Staszek]

Old post i know, but can someone please shed some light on what model wilwood calipers are used in the IE 310 6 pot dynapro kit?
Buying the set from USA and shipping to Australia is killing me in

I will see if I can find them.