Massive BBK Wheel Fitment Guide
Collapse
X
-
Has anybody tried IE 4x100 Alpina replicas? He sells a 16×8 ET28 that is attractive to me.
-
Its not a spoke clearance issue, the caliper physically does not fit in the barrel. 😌Leave a comment:
-
Lee
Leave a comment:
-
The brake kit is the 300x21mm sport kit. The wheels are the 8". However, with the 8", there was clearance issues with the strut, so you would definitely need a spacer.Leave a comment:
-
Well, unless I'm doing something silly, it doesn't look like a 300 x 32 kit is going to fit my wheels. ET25. Knife is 20mm perfectly so it looks like even if I used a massive spacer, it still won't fitSent from my SM-G973U using Tapatalk
Leave a comment:
-
Hey All, Anyone have 15x8 Advanti Storm S1s they have put 300 x 32mm kit under? I'm not so concerned about barrel clearance (still need to check with template), but want to know if I need to go beyond existing 5mm spacers on ET25 wheel? Thanks, John Sent from my SM-G973U using TapatalkLeave a comment:
-
Wow. Yup. Very nice rims. Over the years, some great wheels become NLA, and new wheels get offered.
What width of wheels are they? 7" or 8" wide
Is that a front 300x21mm Sport kit or 300x32mm Race kit?
Let us know.. ;-)
Lee
Leave a comment:
-
Luis sent me this picture
300x21mm BBK w/ Superlite calipers under 16x8 XXR 530. Tons of clearance.
Leave a comment:
-
I've been looking at those, ~1lb lighter than TRM C1 is attractive.
Their site says they're available in 15x9 also, but I can't find them anywhere and I'm skeptical about whether I want to go through the pain of sourcing anything wider than a 225.Last edited by Northern; 03-29-2021, 04:56 AM.Leave a comment:
-
There seems to be tons of clearance behind the spokes for a thick rotor and caliper.
Last edited by Massive Lee; 04-03-2021, 06:56 AM.Leave a comment:
-
-
-
Leave a comment: