Massive BBK Wheel Fitment Guide

[dolby]

I just acquired the massive 300x32 race kit and the rear wheels fit but the fronts are just a few mm to large with 15" D-force wheels.

So far I can't find any wheels that will fit the new brakes. It's a bit frustrating to say the least.

From what I have read, here are the wheels that are supposed to fit over my new BBKs....

Team Dynamics 1.2s 15x7 - Purchased a test wheel from BW and they are a big NO GO.

Kosei K4Rs 15x8 with 3mm spacers - Can not find anywhere. These would be my pick for the car. Anyone have a link to some for sale?

JRW Series 500 - 15x10 These would nearly double my tire consumable costs since I would have to run 275/35/15 Hoosiers.

What am I missing? BTW this is for a fully race prepared e30.

Links to wheels that might fit would be greatly appreciated.

[bnmueller]

What about the Concave 17x8.5 ARC-8?

[TheDirtyS54Thirty]

I did some skimming of the thread, but before I buy new slalom wheels, does the TRM C1 15x8 (or any of the kosei 15x8 et20 tirerack wheels) fit with the 300x32 + Superlites "Race" kit?

Also interested in this.

[Mfever]

Copy that! thanks for the quick responses Lee as well as the awesome products!

[Massive Lee]

Do they even make a AP racing caliper in the street kit size? or are they unobtainable?

Only within the 300x32 Race configuration. At $600.00usd a pop, you want to put these clampers to a good use. ;-)
BTW $600.00usd is what the AP Racing importer Essex, in North Carolina, charges. You can probably get them for cheaper from a distributor. These calipers were much cheaper initially, then suddenly the price hit the roof...

If anyone was able to get them for cheaper, let us know. ;-)

[Mfever]

Do they even make a AP racing caliper in the street kit size? or are they unobtainable?

[Massive Lee]

ahhh rats! I think the street kit would be sufficient for the auto crossing that I do... I would love the ap racing calipers over the wilwoods though. Oh well! Thanks for the quick reply!

For autocrossing, you don't need more than the Street kit. It will be a great improvement over stock. Less play in the caliper. Better modulation and cheap brake pads.

[Massive Lee]

If anyone is wondering

XXR 531 - 16x8 ET20 require a minimum 10mm spacer (12mm would be a safer option) using the Massive BBK 300x32mm Race Kit. No issues in the rear.

Good to know. Now we want to see pictures ;-)

[Q8y_drifter]

If anyone is wondering

XXR 531 - 16x8 ET20 require a minimum 10mm spacer (12mm would be a safer option) using the Massive BBK 300x32mm Race Kit. No issues in the rear.

[Mfever]

ahhh rats! I think the street kit would be sufficient for the auto crossing that I do... I would love the ap racing calipers over the wilwoods though. Oh well! Thanks for the quick reply!

[Massive Lee]

What is the largest kit that fits under Euroweaves? And do the kits still come with ap racing calipers?

Count yourself lucky if you ca fit something else than stock calipers under these wheels.

As far as I know, the 280x22mm Street kit will fit. That's it. The VW Corrado rotor is offset more inward than the e30 rotor, and the caliper is narrow.
Available in two configurations. VW Corrado G60 rotors, or two-piece rotors with alu hats

https://www.facebook.com/pg/Massive-Brakes-178417442267056/photos/?tab=album&album_id=921006024674857

What else is available for our e30?

https://www.facebook.com/pg/Massive-Brakes-178417442267056/photos/?tab=album&album_id=1094663683975756

The kit with an AP Racing caliper is a 300x32mm kit. No way it fits under your wheels. and it is very expensive as calipers only will cost you $1200.00usd for the set ;-)

[Mfever]

What is the largest kit that fits under Euroweaves? And do the kits still come with ap racing calipers?

[Massive Lee]

Wondering if anyone has a Sport or Race kit fitted on these Jongbloed wheels. Maybe even on 15x8. It seems they are available in direct fit - 57.1mm hub and et15 or et25

https://philstireservice.com/shop/jrw-aero-pts-spec-e30/

[robgoesvroom]

No not running BBK yet, all stock brakes. Been eyeing these MASSIVE kits for a long time but haven't pulled the trigger

[TheDirtyS54Thirty]

why go 8" when you can go 10" ;)

My dawg! Are you running a BBK? Hows the clearance inside the wheels?