Parking Brake Actuator Getting Stuck On Hub

[Pro1914]

Hey there, after recently reinstalling my wheel hubs, I noticed that my parking brake actuator is pressing up against it making a clicking sound as I turn it. Does anyone have any idea why is this happening and how I can fix it? Thanks!


Here's a video of it in action.

[Vincenze]

The lock must be inserted between the braking pads.
There is a rotating adjuster at the opposite sides of the braking pads. The lock should be seated like it.

The springs are different at the top and at the bottom.

[roguetoaster]

I'd wager that you have the pivot, #5, in backwards, or flipped, as it's easy to do and pushes the armature outwards. Have you tried to just set the rotor in place and actuate the parking brake?

It's a PITA system that is just a hassle, but you'll get it!

[Pro1914]

Well I appreciate the advice, and I tried flipping the actuator, but I noticed it didn't want to fit in, and it still rubbed and made a clicking sound. I also noticed when I pull the little black rubber protecting out of the trailing arm, it no longer clicked. Any ideas?