springs on an E30 - R3VLimited Forums

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

X

chbimmer

Advanced Member

Join Date: Aug 2004

Posts: 165
#1

springs on an E30

10-14-2004, 01:02 PM

Are there stock spacers in an 89 325is. I remember my 1972 2002 had spacers in the front. i didnt post this in the sticky lowering springs cause i thought it would get lost.

1989 Turbo 325is
87 ETA Dinan Stg 2
Tags: None
Digitalwave

is a poseur

Join Date: Oct 2003

Posts: 6276
#2

10-14-2004, 01:17 PM

Are you talking about the rubber spring pads between the springs and the perches? If so, then yes.

RISING EDGE
Let's drive fast and have fun.
Comment
chbimmer

Advanced Member

Join Date: Aug 2004

Posts: 165
#3

10-14-2004, 02:09 PM

well the ones on the 02 where like an inch thick. how thick are the ones you are talking about??

1989 Turbo 325is
87 ETA Dinan Stg 2
Comment
nando

Moderator

Join Date: Nov 2003

Posts: 34827
#4

10-14-2004, 02:54 PM

it depends, there are several thicknesses for spring pads, from 3mm to 8mm, and the front are different from the rear.

Build thread

Bimmerlabs
Comment
chbimmer

Advanced Member

Join Date: Aug 2004

Posts: 165
#5

10-15-2004, 10:15 AM

well can you take them out and lower your car.

1989 Turbo 325is
87 ETA Dinan Stg 2
Comment
Rob

Moderator

Join Date: Oct 2003

Posts: 8166
#6

10-15-2004, 11:00 AM

yes, you can

BEERTECH
Comment
cobraken

Mod Crazy

Join Date: Oct 2004

Posts: 674
#7

11-01-2004, 01:44 PM

Are these the rubber spring isolaters?

Randall Racing and Engineering
Acworth, Georgia, 30101
http://www.facebook.com/RandallRacingandEngineering
Comment

Previous template Next

Working...