Announcement

Collapse
No announcement yet.

length of rear coilover spring?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Sorry to hi-jack but can you run a rear coilover spring without the adjuster?

    cheers.
    They call me the frog



    - E30 Alpina C2 2.7
    - E30 Alpina C2 2.5
    - E28 M 528I 3.5 (300HP)
    - E36 M3 S50 3.2 (Euro)

    Comment


      #17
      Originally posted by BMC227 View Post
      Sorry to hi-jack but can you run a rear coilover spring without the adjuster?

      cheers.
      Originally posted by E30SPDFRK View Post
      This is JPlue's car, 5" 700lb rear spring with no adjuster.


      '73 2002 m20 turbo [sold] '87 rat rod 325is [couch modded] '91 vert [daily] '88 325is [spec build v1] '84 325 [spec build v2] '99 323i vert [sold]

      Comment


        #18
        Is that 5 inch diameter or length?
        They call me the frog



        - E30 Alpina C2 2.7
        - E30 Alpina C2 2.5
        - E28 M 528I 3.5 (300HP)
        - E36 M3 S50 3.2 (Euro)

        Comment


          #19
          Originally posted by BMC227 View Post
          Is that 5 inch diameter or length?
          Length

          5 inch length. I think diameter is called spring ID which is 2.25 for e30s? Double check that tho


          '73 2002 m20 turbo [sold] '87 rat rod 325is [couch modded] '91 vert [daily] '88 325is [spec build v1] '84 325 [spec build v2] '99 323i vert [sold]

          Comment


            #20
            my rear spring is a coil over spring 5in with a 2in id its big though i think a 1.5 or 1.75 id would b better

            Comment


              #21
              Technically it's not a rear coilover that is being spoken about.

              It's an inboard spring with an adjuster.

              I run, 600lbs 60mm id spring on a true coilover...

              Comment


                #22
                Originally posted by chop_suey View Post
                On an early, high rear arch car, what length should the coilover springs be in the rear so theres minimal wheel gap? Are adjusters needed?

                I was thinkin maybe a 5" or 6" 700ish lb spring.
                Originally posted by DJ W View Post
                where would one find a 5in 700lb spring im getting frusterated with searching i only find 8 and up or 150lb 5in
                thanks
                Ah poop. Wish I wasn't late to this thread to let you guys know that if your going to run that high of a rate in the rear, a 5'' spring won't be low enough for you, especially for an early model.

                1991 325iS turbo

                Comment


                  #23
                  So I don't think anyone officially said. What spring ID are you guys running?
                  GRIPPY'S*GARAGE

                  Comment


                    #24
                    Originally posted by grippymonkey View Post
                    So I don't think anyone officially said. What spring ID are you guys running?
                    I would like to know as well :)
                    They call me the frog



                    - E30 Alpina C2 2.7
                    - E30 Alpina C2 2.5
                    - E28 M 528I 3.5 (300HP)
                    - E36 M3 S50 3.2 (Euro)

                    Comment


                      #25
                      How much, were those 5in 700lbs springs? From where and what brand?
                      @IRON-E30 aka Edwin:D

                      Comment


                        #26
                        my are ebiach 2in id 5 in coil and 700 spring rate but i wish i got 4in. umm mine wer 120 for both threw ultra rev with free shipping.

                        Comment


                          #27
                          I have Eibach 5" 850lbs, 2" ID. Without the adjuster the car is tucking but rubs big time on 225/45/15


                          G.Verelli

                          Comment


                            #28
                            i have 195/ 65/14 and no rub and little tuck

                            Comment


                              #29
                              will a 225/50/15 rub on an early model with a 5in 700/750 lb spring? Or should i step up to a 6in spring?
                              sigpic
                              85 325e 5spd

                              Comment


                                #30
                                Originally posted by gverelli View Post
                                I have Eibach 5" 850lbs, 2" ID. Without the adjuster the car is tucking but rubs big time on 225/45/15
                                thank you for the info.
                                GRIPPY'S*GARAGE

                                Comment

                                Working...
                                X