ST Lowering Springs

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Chriskbmx
    replied
    Originally posted by GodIse30
    I just ordered the 318is springs for my 91' 325i. All I hope is that there isn't any rake or oil-pan-cracking lowness. I'll post some nice pictures and specs after I install them and drive around a bit.
    as long as you drive catious you shouldn't have an issue. my last e30 was slammed and i was just carful. never hit anything but speed bumps lol

    Leave a comment:


  • ButtJuice
    replied
    I just ordered the 318is springs for my 91' 325i. All I hope is that there isn't any rake or oil-pan-cracking lowness. I'll post some nice pictures and specs after I install them and drive around a bit.

    Leave a comment:


  • einstein57
    replied
    I would not be surprised if they were all the same springs. If a M3 is a half inch lower then the 318is from the factory then the net drop would be different even though the final result is they both sit at the same final height.

    Leave a comment:


  • ButtJuice
    replied
    3 left

    Leave a comment:


  • Bimmerguy91
    replied
    Sweet that's the ones I bought of course a vert will get lowered more than a coupe or sedan unless they are vert specific springs

    Leave a comment:


  • HerbReal
    replied
    Laura,

    That's crazy low! I should've bought the 318i springs than the 318is! I'm straight jelly Clarkson.

    Herb

    Leave a comment:


  • Laura
    replied
    Originally posted by Bimmerguy91
    Which springs are these lol that's LOW
    the ones for a 318i. yeah it's lower than I expected, but I'm not complaining :)

    Originally posted by mr ilia
    Are you stancing?
    that's the plan. I need wider wheels. and right now my camber is all funky from the drop.

    Leave a comment:


  • mr ilia
    replied
    Are you stancing?

    Originally posted by Laura
    stock shocks (for now), cut bumpstops, e90 drophats:


    I'm so excited :)

    Leave a comment:


  • Bimmerguy91
    replied
    Originally posted by Laura
    stock shocks (for now), cut bumpstops, e90 drophats:





    I'm so excited :)
    Which springs are these lol that's LOW

    Leave a comment:


  • frankenbeemer
    replied
    Originally posted by iamcreepingdeath
    bam, ordered. 2 sets left of the 318i springs.


    nitpicky OCD worry here: I put a "1" for the qty, I presume that is one set of four springs? It didn't say anywhere.
    That's what I did and I received a full set. Go wash your hands.

    Leave a comment:


  • dantheman
    replied
    Crap, they sold out :(

    One question, are the rear springs linear like in the picture?

    Leave a comment:


  • iamsam
    replied
    bam, ordered. 2 sets left of the 318i springs.


    nitpicky OCD worry here: I put a "1" for the qty, I presume that is one set of four springs? It didn't say anywhere.

    Leave a comment:


  • Swanny
    replied
    Diggin the r2d2

    Leave a comment:


  • Laura
    replied
    stock shocks (for now), cut bumpstops, e90 drophats:





    I'm so excited :)

    Leave a comment:


  • BamaE30
    replied
    I compared the M3 set and the 318 set and the M3's are 1.25" longer and seem stiffer just by hand compression side by side. I may cut 1/2 or 1 full coil from the M3 set but do not need to decide that for now I have my eye on a 4 door 5 speed 325I that needs a good home. I'll run the 318 springs on my 92 vert and my JOM's on my 88 vert. Tried to order the deal on Tokico Shocks - Illumina Series but the web site was funky and would not complete the order.

    Leave a comment:

Working...