Easiest, best way to change power steering fluid

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rs4pro3
    R3V Elite
    • Oct 2003
    • 5808

    #16
    Originally posted by trashcop 80s 80s
    The one that is a 22mm? I tried pulling that once, then there was another nut, I pulled that off and nothing came out. I think the only way to do it is to pull a hose.

    Would it work if I pulled the return line and had someone turning the wheel while I add fluid in the tank to give it a flush? THe fluid looks pretty nasty and I want to try to get as much out as I can.
    Ya that's the one I'm talking about it's in the front of the rack, large either 22 or 24mm nut, I didn't notice another nut under it, so I'd just pull a line then and let it drain
    85 325e 2.7 ITB'd stroker

    Comment

    • parkerbink
      R3V OG
      • Jun 2004
      • 10134

      #17
      No Need says it in the Haynes, good enough for me. I put it in when I was driving here from L.A. and topped up the system. It was very little fluid, that was a year and a half ago.

      [IMG]https://cimg4.ibsrv.net/gimg/my350z.com-vbulletin/550x225/80-parkerbsig_5096690e71d912ec1addc4a84e99c374685fc03 8.jpg[/IMG

      Comment

      Working...