iC suspension overhaul

[bowtie2bimmer]

In the midst of gathering parts for a suspension overhaul on my 87 iC. So far

Control arms w/ off set ca bushings
new tie rods
motor mount
Tranny mounts
Powerflex poly subframe, diff, & trailing arm bushings
inner/out cv axle boots
Front and rear sway bar end links
Front and rear upper shock mounts
Front upper and lower spring pads
rear upper and lower spring pads
H&R touring cup kit

Anything else I am missing?

[325ix]

Sway bar bushings is the only thing I can see, maybe do the guibo while your in there replacing things of that nature.

[bowtie2bimmer]

rubber fine or poly? just looking for a fun DD

[Roysneon]

Good quality rubber parts are fine, but poly lasts longer.

[jeffnhiscars]

I'd throw in an e36 rack and how do you like the cup kit ?

[bowtie2bimmer]

I'd throw in an e36 rack and how do you like the cup kit ?

not installed... looking to do a 3 day blitz on the car once its all collected

[CrusherCurtis]

List looks good. PM me or post who much you spent on every thing once ordered. I did every thing on my front end top to bottom last spring.

[jeffnhiscars]

not installed... looking to do a 3 day blitz on the car once its all collected

I'd love to see pics when you are done. I like the fact that the cup kit only drops the rear by 3\4in since my sits low enough now and most lowering kits drop it an inch+.

[lowsodium]

Im about a month away from ordering every suspension part needed for a rebuild. My suspension is utterly shot. Appreciate the list, and any additions we should need.

Where are you ordering most of it from?

[NV325i]

Anyone else using the touring cup kit and how does it compare to the eibach pro kit/bilstein sport setup.

[bowtie2bimmer]

Im about a month away from ordering every suspension part needed for a rebuild. My suspension is utterly shot. Appreciate the list, and any additions we should need.

Where are you ordering most of it from?

Pelican Parts... And before anyone gets on their high horse how other companies are better, over the part year i have done several orders and they have been great with customer service and pricing.



Sent from my DROID RAZR using Tapatalk 2

[F34R]

Is this a build or a suspension list request?

[bowtie2bimmer]

Is this a build or a suspension list request?

That's what i have going so far... some i have, some still need to be ordered. Just seeing if there is anything else to add while I've got it apart

Sent from my DROID RAZR using Tapatalk 2

[roguetoaster]

Have you tried pricing vs. AutohausAZ? When I did my refresh I came out a few bucks ahead there versus Pelican.

[andrewm]

Rear strut mounts arent on the list. And the spring pads aren't really all that needed, at least not for the non verts. I took mine out to lower the car an extra 10mm in the rear