H&R Race/IE3 - Front Camber

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • JRKOUPE
    replied
    HR race here...

    I run a fixed camber plt, and I have neg 3.3 on both sides......works very well on track..I need more tho for serious track work.

    Leave a comment:


  • SkiFree
    replied
    Yep, can't please everyone I guess.

    OP you may want to even consider using a simple set of fixed camber plates, if you want to keep a softer street feel (since you retain the stock upper strut bearing and all its rubber isolation). But there are plenty of people running the IE Spec plates.

    Leave a comment:


  • Cabriolet
    replied
    Originally posted by Zreberlcoe
    IE camber plates aren't very good.
    i know several people using them for more than 5 years. they track and autox their cars. 0 issues.

    Leave a comment:


  • Digitalwave
    replied
    Originally posted by Zreberlcoe
    IE camber plates aren't very good.
    Care to elaborate?

    Leave a comment:


  • Zreberlcoe
    replied
    IE camber plates aren't very good.

    Leave a comment:


  • Cabriolet
    replied
    yes it will be. you wont have enough front camber to match the rears. lowered im at like -1.5 degrees and you will need -3 to really make the car effective.

    Leave a comment:


  • Digitalwave
    replied
    Originally posted by jlevie
    For best performance you'll want camber plates. I'd crank in at least 2.5 deg of camber.
    Yeah... that's what I figured. Are the IE SpecE30 plates a viable option for $100-150 less than GC and Vorshlag?

    Leave a comment:


  • jlevie
    replied
    For best performance you'll want camber plates. I'd crank in at least 2.5 deg of camber.

    Leave a comment:


  • Digitalwave
    started a topic H&R Race/IE3 - Front Camber

    H&R Race/IE3 - Front Camber

    What should I expect for static front camber with H&R Race or IE3 springs? Right now my car is on Racing Dynamics springs and it's clear that there is barely any camber in the front. The car is being setup for autocross, so I'm deciding if it's going to be necessary to order camber plates.
Working...