HR race here...
I run a fixed camber plt, and I have neg 3.3 on both sides......works very well on track..I need more tho for serious track work.
H&R Race/IE3 - Front Camber
Collapse
X
-
Yep, can't please everyone I guess.
OP you may want to even consider using a simple set of fixed camber plates, if you want to keep a softer street feel (since you retain the stock upper strut bearing and all its rubber isolation). But there are plenty of people running the IE Spec plates.Leave a comment:
-
-
-
yes it will be. you wont have enough front camber to match the rears. lowered im at like -1.5 degrees and you will need -3 to really make the car effective.Leave a comment:
-
-
For best performance you'll want camber plates. I'd crank in at least 2.5 deg of camber.Leave a comment:
-
H&R Race/IE3 - Front Camber
What should I expect for static front camber with H&R Race or IE3 springs? Right now my car is on Racing Dynamics springs and it's clear that there is barely any camber in the front. The car is being setup for autocross, so I'm deciding if it's going to be necessary to order camber plates.Tags: None

Leave a comment: