Did i miss anything??

[Tarn]

Wanted to get my suspension up to date, I think I have all I need, but I would like it if your guys looked it over before I order. I’m not looking for an extreme racing type suspension just something that will handle well. Also do I have stuff here that is not necessary?

H&R Adjustable Rear Sway Bar, 21mm
H&R Adjustable Front Sway Bar, 27mm
H&R Sport Spring Set
Bilstein Sport Front Strut Insert x2
Rear Shock Sport x2
Sway Bar Link Rear x2
Rear Spring Pad x2
Upper Rear Spring Pad x2
Upper Rear Shock Mount x2
Bushing Set for Rear Trailing Arm x2 sets
Tie Rod Lock Nut x2
Sway Bar End Link, Front x2
Upper Strut Bearing x2
Upper Front Spring Pad x2
Lower Front Spring Pad x2
Shock/Strut Mount Nut x10
Bushing Set for Lower Control Arm Brackets
Rear Shock Mounting Bolt x2
Camber Plates street
Rear Subframe Mounts - urethane - street
Rear Bushing Kit - urethane

[StereoInstaller1]

Maybe a set of IE rear camber adjustment bolts...allows rear camber adn toe adjustment, but is a weld-in kit.

Luke

[Tarn]

Maybe a set of IE rear camber adjustment bolts...allows rear camber adn toe adjustment, but is a weld-in kit.

Luke

Thanks for the suggestion, would it be completely "necessary"? If so is there any DIY's on those?

[eighteight325is]

How about a bench vise and 3 foot pipe wrench to break the lock rings on your front struts free :)

[wazzu70]

Just soak with PB blaster the night before. I got mine off by myself with 2 pipe wrenches. One on the housing one on the gland nut. They were rusted like crazy as well.

Penetrating oil saves a lot of hassle.

[IS]

A punch and hammer, followed by vice grips (or the bilstein gland nut tool) will get it off without a problem.

[Tarn]

IE Camber Plate- adjustable street

anyone use these? If so how did they workout for you?

[IS]

If you must have camber plates on the street, the above is what I would use. Anything more is overkill (ie. unnecessary range of adj. and unjustified $).

Remember, once you set camber and get the car aligned, you're not supposed to change your settings.

[Tarn]

Thanks for replay and yes I know once the car is aligned I should not change the settings. "If you must have camber plates" you don't have camber plates? If not how bad is the tire wear?