Tight Tolerance Lug Bolts

[I-San-Juu]

Alright guys, I have some wheels that I want to slap on the E30. My problem is they have a very tight tolerance, and I know its no way the OEM bolts will fit. On my other ride I used some tuner lugs from AutoZone, they are the spline drive type and there was just enough space for the driver to get in there, and sometimes it was a pain to get it out. I've been looking and searching but I havent come across a set. Does anyone know where I can get some? BTW, these are the wheels...

Im still trying to find the specs to see if they will fit...the Drag DR20s rubbed the shock when turning hard and turning in reverse...I guess I could just look and see...

[E30stan]

check turnermotorsports.com

[daniel]

wtf

[Farbin Kaiber]

replace the OEM stuff with a set of studs and removable lug nuts.

[2002maniac]

wtf

hahaha

[Danny]

Drill out the holes.

[I-San-Juu]

wtf

No it's fbp.

[moatilliatta]

wut

[e30_325es]

You want tuner lug nuts to install your tuner wheels on your soon to be riced out car if you install those wheels on it. Oh, and you will need spacers and then longer lug bolts to correct the rubbing issue.

[I-San-Juu]

Damn, so now tuner wheels make a car rice? Fuck.
Yea. Eat it.

Don't remember asking for opinions. When you give me money for non "tuner" wheels for my car then your opinion will matter.

[I-San-Juu]

Oh and by the way, I know how to fix a rubbing issue. Never asked how, just mentioned that they did rub.

[moatilliatta]

sometimes people give away bottle caps.

[Massive Lee]

To the OP. Maybe you have the wrong wheels for your car...

[newman]

bahaha


those wheels are so bad.

[MikeK]

This thread has potential.