Announcement

Collapse
No announcement yet.

Kosei 16x7.5, what offset and tires

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Kosei 16x7.5, what offset and tires

    My car has H&R sports and Koni ajustables. I want to go with the kosei k1's, but I'am not sure which offset to specify so that I don't have to run spacers. (et22 or et32) I also want to run avs100's, what the best all around size? (rubbing and spacers taken into account)

    Thanks

    #2
    think of it this way. 32 is too far in, and you cant get 5 or 8mm spacers in hubcentric.

    22 is a little bit further out, but a good fender rolling should be all you need. if it were me, i'd do 22mm offset, and throw on some T1-S in 225/45R16
    sigpic

    Comment


      #3
      22mm for sure. most 7.5" wide wheels for E30s are in the 20mm range, so you'll be fine with 22mm.
      Build thread

      Bimmerlabs

      Comment


        #4
        8) thanks

        Comment


          #5
          Dont mean to jack your thread, but i've got another question.

          I'm going with Kosei k1's in the 16x7.5et22 to replace the wheels i have on there now. The tires on my current wheels are 205/45-16, and have about 60% tread left. If i ran these tires on the K1's would they be way to stetched out? or would they get me through the summer. I guess i could sell the borbet's i have now with the tires on them and get new ones, but if these tires will work for the summer i'd probabally just do that. Thanks

          Kev

          Comment


            #6
            205s are fine on a 7.5" wheel, but the 45 profile is too short. 215/45 or 205/50 would be better.
            Build thread

            Bimmerlabs

            Comment

            Working...
            X