Interesting steelie option

[BoxDriver86]

So I was digging around ebay.de for some wheels and came across this:
http://cgi.ebay.de/4-Stahlfelgen-Man...item2a0d5f7446

I don't speak German but from what it appears this guy is taking factory steel wheels and converting them to three piece. I know people have been interested in widening steel wheels and the Diamond Racing stuff but I thought this would be an interesting twist.

Like I said, I don't speak German at all and don't have enough interest to research them but it's an option for some folks. Sorry if it's a repost.

[6gen91]

this is raw. how much is it? i need to learn german on the quicks

[matias88e30]

^^^ use google translator, works very good.. i bought some ebay stuff from a guy a while ago translating everything on google.
btw. those steelies look sick!

[Dj Buttchug]

three piece steelies? wtf. ballin'

[E30_(1st Musk)_]

those are sick!!!

beats diamond racing steelies in my opinion and if i had extra money i would probably try and buy a pair of these

[MaxBell]

That's almost 800 dollaz. Diamond Racings are almost half that.

[325ix]

That's almost 800 dollaz. Diamond Racings are almost half that.

These are now three piece custom whels. Not exactly the same level anymore.

[lolcantturn]

That's almost 800 dollaz. Diamond Racings are almost half that.

These are significantly better looking

[IRON-E]

those are sick!!!

beats diamond racing steelies in my opinion and if i had extra money i would probably try and buy a pair of these

I know a place in LA where they can widen steelies dude, just let me know when?

[mr.vang]

stockton has one too.. i did a quote on a 15x6 widen to 15x8 cost $60 per wheel out the door.

[JasonC]

That's almost 800 dollaz. Diamond Racings are almost half that.

And these dont look like they belong on a dirt track car or 4x4...

[CHIF8008]

for real- 3 piece steelies with options sounds tits

[BoxDriver86]

I think you have to send him the original wheels before they will modify them. It's a shame that a bottlecap wheel doesn't have the room for it. I'd pay stupid money for a 3 piece bottlecap in 14x8. I think it would be impossible for multiple reasons.

[LJ851]

I think you have to send him the original wheels before they will modify them. It's a shame that a bottlecap wheel doesn't have the room for it. I'd pay stupid money for a 3 piece bottlecap in 14x8. I think it would be impossible for multiple reasons.

If you are too not concerned about them being 3 piece i am pretty sure you could have this done. There are multiple guys cutting and welding fuchs for porsches in all different ways. One way they use to get a wider wheel with more dish is to cut the outside lip off a set of wheels and weld on the inside lip (cut off another set of wheels) . You cant even tell its been done.

[matias88e30]

stockton has one too.. i did a quote on a 15x6 widen to 15x8 cost $60 per wheel out the door.

any website to take a look at it? thanks