10mm front spacers-not hubcentric-safe ??

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ruqknuf
    Grease Monkey
    • Jul 2009
    • 378
    #1

    10mm front spacers-not hubcentric-safe ??

    I'm sure I can answer this question on my own - but thought I'd see if anyone else has acomplished this safely and without alot of wheel wobble.
    sigpic

    Leave Feedback here:

    http://www.r3vlimited.com/board/showthread.php?t=261541
    Tags: None
    • ForcedFirebird
      R3V OG
      • Feb 2007
      • 8300
      #2
      Good luck!
      john@m20guru.com
      Links:
      Transaction feedback: Here, here and here. Thanks :D

        Comment

        • reelizmpro
          R3V OG
          • Dec 2003
          • 9529
          #3
          Anything over 8mm should be hubcentric and you should use longer bolts as well.
          "I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj

          85 323i M TECH 1 S52 - ALPINEWEISS
          88 M3 - LACHSSILBER
          89 M3 - ALPINEWEISS II
          91 M TECH CABRIO 2.7L TURBO - MACAOBLAU

            Comment

            • TG Goose
              Wrencher
              • Jul 2011
              • 234
              #4
              I tried some 1/4 generic spacers, wheel wobbles at anything over 70km/h.
              ______________________________________
              1984 LSB 318i - Sold
              1986 325i - Motor Swapped Track Car Project
              1995 318ti - Sold
              1999 540iA - Daily Driver

                Comment

                • x17x
                  Advanced Member
                  • Apr 2011
                  • 134
                  #5
                  bad idea...even my 5mm is hub centric...

                    Comment

                    • Vince30
                      R3VLimited
                      • May 2009
                      • 2318
                      #6
                      I have a hubcentric spacer question. I was looking on ebay and I found A kit that says it fits 1 3 5 6 7 8 series. This doesn't make sense to me because there are different hub sizes for different models.
                      Link
                      http://cgi.ebay.com/ebaymotors/Bille...Q5fAccessories

                        Comment

                        • Balleristic31
                          R3V Elite
                          • Aug 2009
                          • 4198
                          #7
                          Is 6mm hubcentric safe to run on stock bolts?

                          -NICK

                            Comment

                            Previous template Next
                            Working...