Announcement

Collapse
No announcement yet.

Flush Fitment (STANCE) Thread

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Flush Fitment (STANCE) Thread

    Didn't see one of these around (i did a quick search) for those who like the more flush (or hella flush if you feel the need). Make it easier for us who like stance to find offsets/tire sizes needed.

    (when posting a picture of your setup post with rim size, offset and tire size.)

    I'll guess i'll start it off with what im working with.



    16x8.25 +0 offset, will be running a 205/50 tire all around.

    Wont be on the ground till next weekend (have some JOM coilovers on the way with some camber plates.) Will be rolled and pulled as needed.
    My Build Thread Here (E30) ---> http://www.r3vlimited.com/board/showthread.php?t=240528
    And Here (2002tii) ---> http://www.r3vlimited.com/board/show...35#post3173435

    #2
    Stancedorks.com

    Comment


      #3

      15x7 ET20 5x120 205/50/15 all around e36 5lug

      Comment


        #4
        Nice rims op.

        My vert.
        17x8 and 9 et13. 20mm spacer front. 15mm rear.



        I have others. if Im not to lazy I will dig them up.

        Comment


          #5


          14x6 bottlecaps ET35 E30 4-lug 4x100 185/65-14 Dunlops

          Comment


            #6

            Comment


              #7
              Hey White325is (post#4) what's the brand of your rims?

              Comment


                #8
                Originally posted by svn2002s View Post
                Hey White325is (post#4) what's the brand of your rims?
                lol "rims"
                '84 318i M10B18 147- Safari Beige
                NA: 93whp/90ftlbs, MS2E w/ LC, 2-Step
                Turbo: 221whp/214ftlbs, MS3x flex @ 17psi

                Comment


                  #9
                  Originally posted by svn2002s View Post
                  Hey White325is (post#4) what's the brand of your rims?
                  iforged senekas. they are fs..
                  2k shipped.

                  Comment


                    #10
                    Op what wheel brand and model are those. I'm in the market for a set of wheels with a low offset and nice stance. This thread is gonna be good for me

                    Comment


                      #11
                      xxr 527 I believe..

                      Comment


                        #12
                        here's mine.
                        BBS Rs 17" fronts 8.5 et 13, rears 9.5 et I forgot.
                        215/40/17 and 245/35/17






                        Comment


                          #13
                          Originally posted by Sagaris View Post


                          14x6 bottlecaps ET35 E30 4-lug 4x100 185/65-14 Dunlops
                          fuhhh... GAME, OVER.

                          1991 325iS turbo

                          Comment


                            #14
                            Originally posted by The Humjet View Post
                            Op what wheel brand and model are those. I'm in the market for a set of wheels with a low offset and nice stance. This thread is gonna be good for me
                            White325is whas right they are XXR 527's cheap and something to get this project started (purchased the car 2 weeks ago lol)
                            My Build Thread Here (E30) ---> http://www.r3vlimited.com/board/showthread.php?t=240528
                            And Here (2002tii) ---> http://www.r3vlimited.com/board/show...35#post3173435

                            Comment


                              #15


                              215/40/17 Falkens
                              17x9+35 xxr 962's +38mm hub adapter/spacers hub ring adapters for e30
                              +roll front/cut inside back

                              www.woranges.tumblr.com

                              Comment

                              Working...
                              X