Flush Fitment (STANCE) Thread

[White325is]

Some flush fitment on one of my projects from last winter.




Wish I would have finished it.

[lambo]

Nice lambo, but your front wheels are always pointing the wrong way! Wan to see the futuras!

haha! My front fitment isn't quite where I would like it... but, to get it where I'd like it I'm gonna have to go the bag route...

[DER E30]

haha! My front fitment isn't quite where I would like it... but, to get it where I'd like it I'm gonna have to go the bag route...

That's where I'm at... I'd like to go lower but I'm on unshortened struts with about 3/4 inch of up travel to the bump stops. To get new iX konis and cut the struts is ~half way to a front bag kit. I go bags and then I can really slam it.
Plus the lip and oil pan get ever closer to the ground.

[lambo]

Some flush fitment on one of my projects from last winter.




Wish I would have finished it.

Are those early model rear arches? My plan is to graft early model arches onto my car when I end up repainting it.

[lonestar22]

Are those early model rear arches? My plan is to graft early model arches onto my car when I end up repainting it.

That's exactly what I was going to ask

[White325is]

They are. But to get them to fit 100% like oem. You will need to remove a section from the center of them and redo the whole inside wheel arch.

[Ray Smoodiver]

They are. But to get them to fit 100% like oem. You will need to remove a section from the center of them and redo the whole inside wheel arch.

It's easier to stitch the late model light panel into an early car than it is to get early arches onto a late model.

[gkurey]

Here's mine, pretty flush.

I can't get quite as low as I want...working on lower though;















Cheers~

[lambo]

^ oof those are sexy

[Todd Black 88]

17x8 et12 front, 215/40/17
17x8.5 et6 rear, 235/40/17

[White325is]

It's easier to stitch the late model light panel into an early car than it is to get early arches onto a late model.

Its easier to start with a free car that's rust free, rather than start with one that's not and you have to pay for. ;)

[Mr. Schwarz]

Some flush fitment on one of my projects from last winter.




Wish I would have finished it.

Where can i get some of those polished lip steelies?

[dannyyisntt]

^Diamond racing

[wark]

Those Equips look surprisingly good on e30s

[Mr. Schwarz]

Old Wheels. 16x8 +20 front 205/40 +10 rear 215/40


Newer Wheels 17x8 +15 215/45 17x9 +20 245/45