16x9et10 215/40. Sold them because the tire size was too small diameter-wise (among other reasons, but that definitely influenced it).
16x9 ET6 anyone got it fitted?
Collapse
X
-
that's what I'm saying
people that say he isn't going to fit the offset and size he asked about and not be able to run any kind of tire width at all are crazy... fender rolling/pulling are not hard at all. It depends if you want to put in a little work to fit more tire or less tire. My fenders are barely massaged, and I run nearly this same outer rim lip to fender clearance (10" +15) with a chunky tire now.
:DComment
-
Before I got my RS's, I was running 16x9 +15 A's with a 5mm spacer (so +10 effective) with a 225/45R16 Kumho...
Fender lips were folded in and thats about it. Running 650lb rear springs with konis it would only scrub on the biggest of all bumps (2-3 times a week daily driven).


90 318i M62B44 OBD1
02 530i Touring (Airlift 3P)Comment
-
My wheels are 16x9, et18 out back and 16x8.5 et24 up front. I am running 205/40 tires up front and 215/40 out back. The first picture is with a 15mm spacer all around and the second is with 15mm up front only.


There is a decent ammount of room like this. I think with a nice roll and maybe slight pull I could get a 225 easliy and probably a 235.Comment


Comment