Need to confirm...

[Digitalwave]

Roll more! With the power you are going to be making I would think you want more tire than a 225 anyways.

[MR 325]

I'll be happier with 16's anyway

[Digitalwave]

I think you'd be better off getting some wide 17's and running at least a 235 tire, unless you don't care about traction.

[MR 325]

I appreciate the suggestion TJ but I will be fine

Anywhere cheaper than Turner for the spacers? I do want H&R's though

[e30sd]

I think you'd be better off getting some wide 17's and running at least a 235 tire, unless you don't care about traction.

little bitch, 16x8.5 k1's or comps + 245/45/16 ftw

[Mystikal]

Shot in the dark on the wheels:

Maxxim RS copies or SSR Comps?

[MR 325]

haha, I am gettin the Maxxim's

[nefarious7907]

could try thetirerack, they might sell HR I almost forgot about longer stud/bolts, those might be important.

[2002maniac]

et17s??

I have 15x7 et17 as well. They fit fine with a little negative camber and stiff springs.

[Mystikal]

haha, I am gettin the Maxxim's

I'm a freak, eh?

[MR 325]

I'm a freak, eh?

It's ok, I like stalkers

Ok so 15mm HR's it is, this shit better fit or I'm gonna come to Canada and kick your ass :D

[rwh11385]

i'm tired of anonymizing... urban time

i just saved you like $30

http://www.evolutionsports.com/productDetail.cfm?catID=50&ProductID=639

i ordered my spacers from there. good peoples.

[MR 325]

Thanks R

[MR 325]

Just a quick correction, my current MiM wheels are et13 [and rubbing]

Do you guys think at et20 with the Maxxim wheels and 225/45's I will be alright? I'm going to need a 73mm to 57.1 hubcentric ring to make the wheel fit the spacer anyway so couldn't I just get the 10mm spacers?

[Digitalwave]

Just a quick correction, my current MiM wheels are et13 [and rubbing]

Do you guys think at et20 with the Maxxim wheels and 225/45's I will be alright? I'm going to need a 73mm to 57.1 hubcentric ring to make the wheel fit the spacer anyway so couldn't I just get the 10mm spacers?

Hubcentric rings still need a lip to mount on, you will understand once you get them.

ET20 with 225's on a 7" wheel will be close, as you can see my ET20 7" with 205's almost rubs, but with some fender rolling you will be ok.