Absolute Lightest 15x7 E30 wheel that does NOT require spacers?

[Digitalwave]

Well... he did say 15" and the lightest, the Grid being neither of those.

And they are 14.5lbs.

[Mike325]

16" rota grids are 14-15 pounds. Needs spacers tho. Just a suggestion.

[E30 Racer]

What is the factory offset for an e30? I thought it was et35? I guess the width of the wheel changes that though...

Factory 15x7 are ET24.

[Digitalwave]

Cars don't have offsets, wheels do.

[AndrewBird]

What is the factory offset for an e30? I thought it was et35? I guess the width of the wheel changes that though...

[Ray Smoodiver]

Alpinas?

[E30 Racer]

http://www.1010tires.com/wheel.asp?w...e+1%2E0+%2D+GM

10.5lbs and forged. A bit pricey though.

I want a set for my MG...

Not bad, but when you factor another additional cost and weight (1-1.5 lbs) for the spacers needed for non-ix applications, they become a bit less appealing...

[AndrewBird]

http://www.1010tires.com/wheel.asp?w...#37;2E0+%2D+GM

10.5lbs and forged. A bit pricey though.

I want a set for my MG...

[E30 Racer]

Try Kodiak. Not cheap, but they'll be about the lightest a wheel can safely be made.

[Brew]

Buy my BBS RG's: 12lbs, forged, 15x7, et25, hubcentric, sexy.

[Axxe]

Why 15x7?? Why not go 15x8 so that 225's sit better? I doubt you are going to be racing competitively, so wheel weight doesn't really matter that much, so long as they are around 15lbs or less

[fretburnr]

why are you so against spacers anyway? if this is for a track car, you're probably running studs anyway, so spacers aren't a big deal.

i'm guessing unsprung weight, but i'd like to know as well

[AdamF 88iS]

15x7 Kosei K1s are I believe ET27 and in the 13lb range IIRC.

[nando]

why are you so against spacers anyway? if this is for a track car, you're probably running studs anyway, so spacers aren't a big deal.

[Ben Carufel]

Hubcentric rings matter? They were always a PAIN on my 240.

I wouldn't be against them, but wheels that don't need them would be cool.