Originally posted by rnw
View Post
Announcement
Collapse
No announcement yet.
ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
Collapse
This is a sticky topic.
X
X
-
Originally posted by StreetMafia21 View Postsup, ok so i just picked up some 16x9 et12 im having them re-drilled to 4x100 .what tire profile will i need. For a nice stretch?? will i need spacers to fit the fronts ??will rolling fenders flat be ok or will I need to flare the fenders out as well??
Comment
-
Originally posted by GunMetalGrey View Post16x9
Et25
DTM flares, which adds two inches out on the flares.
Coilovers
I want the tires to be filling out the flares, but not have to worry about rub, I can run spacers no problem.
Same size tires all around.
From what it sounds 245/45 with 15mm spacers all around?
Could I get away with a 245/50? In order to get road tires lol
Comment
-
Originally posted by Pl3wA View Postsorry, offset is +32. pretty ridiculous. will it be even possible to use the fronts? 9.5"? if so, will 18mm spacers work and which tire size?
Thank you
Comment
-
Originally posted by dmoney(AB) View Post17x8 et 32
17x8.5 et 32
215/40
What spacers would you use
Possible to fit a wider tire?
10mm front spacer, none in the rear. 235/40 all around. The rear will be very close to the trailing arm seam and may need either a tiny spacer or a slight grinding of said seam.
Comment
-
mystikal, here to badger you again
I decided to go ahead and add flares (IE or dtmfiber) to my project car so I can fit some better sized rubber on my wheels, which are the typical brock b1 17s, 8.5et13 fronts and 10et20 rears. What can I fit now? Don't mind spacers if need be. I was going to go with newmans set up of having 245/45 and 275/40 as he had IE flares also. Any other thoughts?
TIA2008 335i - n54b30
1991 318i - m52b28
1994 fzj80 - LAND CRUSHER
Comment
-
Originally posted by drumad View Postmystikal, here to badger you again
I decided to go ahead and add flares (IE or dtmfiber) to my project car so I can fit some better sized rubber on my wheels, which are the typical brock b1 17s, 8.5et13 fronts and 10et20 rears. What can I fit now? Don't mind spacers if need be. I was going to go with newmans set up of having 245/45 and 275/40 as he had IE flares also. Any other thoughts?
TIA
Comment
Comment