ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
				
					Collapse
				
			
		
	This is a sticky topic.
				
				
				
				X
X
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 Brake clearance can't be determined by wheel specs unfortunately. You will have to try them on.
 
 16x8 +10 is ideal with a 205/45. You will likely rub 205/50 in the rear without rolling.Comment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 Sounds decent, though you may want to consider a 195/50. You will have very very little ground clearance on the 195/45s, if you haven't already invest in a skidplate.Comment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 It would look great with 25mm adapters. 195/45 front 215/40 rear would be a nice even fitment.http://www.r3vlimited.com/board/show...05#post3304005
 
 5x130. 16x7.5 et32 16x9 et 38
 
 I would ideally run 18 or 20 mm adapters.
 
 
 
 
 How would 25mm adapters work for this fitment? I have a source on some and trying to determine if the final offsets are too low?
 
 Thanks again!!Comment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 Thanks for the reply mate, Skid plate already acquired :) I agree with you though. 195/50's probably a better option.
 
 I am used to running fairly low, my 318is coupe had 40mm clearance between road and skid plate :)E30 325i Touring currently under construction.
 http://www.r3vlimited.com/board/show...256444&page=20
 sigpicComment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 Sorry should have said the rota grid v in this fitment if you know, much appreciated.Comment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 
 i just picked up my touring, and test fitted my bbs RM's. i ordered a pair of even bigger lips. finished sizes will be 15x9.5 et-6 up front and 15x10.5 et-19 in the rear, running a square 205/50/15 falken rt615. just put in my order for a set of JOM. this will be my winter beater, but hell i might as well have fun with it during the fallComment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 so,
 
 318is with apex arc-8, running 235/40/17 and JOMs and no fender roll.
 
 currently on 215 and want to go as wide as possible w/o roll.
 
 I see from previous post 235 is safe, but my concern is on a moderately dropped car.
 
 yay or nay?
 
 thank you.Comment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 Nope. You will definitely need a roll for 235s.Comment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 16x9 on all 4 corners, et15, will I need any kind of spacer or fender rolling? Ultimately going for a flush look.
 
 Thank you!Comment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 alright i looked all over online and well there arent much answers for ix questions so here i am again. what offset will i have to run with a 8 inch wide rim on an ix or do i have to run 7.SELL ME YOUR E30
 1988 Apline 325iX SOLD
 1999 MINT Lincoln Towncar Pimpin
 My Bike when they shit out :wgaf:Comment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 +20. 225/45/15 Hankook R-S3 for a street legal track tire.Comment





Comment